What Bearings do I Need for My 2013 ORV Timber Ridge 2 Axles AL-KO with the serial number: 402379.9?
Updated 03/13/2025 | Published 03/08/2025 >
Question:
Hi, I need axle bearing kits for a 2013 ORV Timber Ridge 2 axles - made by AL-KO with the serial number: 402379.9 and the other decal text is: T52P86.5/68.5TM655ULE ML4SPIOB Hope you can help. Thanks
asked by: Richard S
Expert Reply:
Hello Richard,
Thank you for the axle information. Based on the text you provided, T52P86.5/68.5TM655ULE ML4SPIOB, the T52 suggests that you have a 5,200-pound axle. However, since there isn’t a universal standard for trailer axles, I recommend double-checking either your bearing numbers or measuring your spindle to confirm. For a 5,200-pound axle, the common bearing numbers are inner bearing 25580 (I.D. 1.75") and outer bearing LM67048 (I.D. 1.250"), so you were right on the money with the Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, and 412920 Seal # TMK72VR. I’ve attached an image to show where to measure on the spindle.
If your measurements differ from the I.D. of the bearings, please let me know. Also, are you getting everything ready for a big trip? If so, where are you headed?
Product Page this Question was Asked From
Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, 412920 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- Timken
more information >
Continue Researching
- Shop: Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, 412920 Seal
- Shop: Trailer Wheel Bearing Kit, LM67048/25580 Bearings, 25580/25520, 10-36 Seal
- Search Results: vent screen
- Shop: Bug Screen for Suburban 10-Gallon RV Water Heater Vent - Qty 1
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Search Results: al ko axle
- Shop: Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Grease Seals - I.D. 2.25" / O.D. 3.376" - for 12 in x 2 in Hubs after 1998 - Qty 2
- Search Results: axle cotter pin
- Search Results: dexter 7000 lb brakes
- Search Results: trailer hubs and drums
- Search Results: electric brake wire connectors
- Q&A: Will the Dexter 7,000 Lb Electric Braking Assemblies Fit a 5,200 Lb Axle
- Q&A: Replacement Brake Assemblies for AL-KO 363233.1 and 363233.2 Brakes
- Q&A: Typical Mileage Lifespan from Magnets in Electric Trailer Brake Assemblies
- Q&A: Can 7000lb Braking Assemblies Be Used On 5000lb Axle?
- Q&A: What is the Difference In Electric Trailer Brakes for 5,200, 6,000, and 7,000 Pound Trailer Axles
- Q&A: Axletek-12-GG Replacement Brake Assembly and Hub Recommendation
- Q&A: Are Dexter or AxleTek 12 Inch Brakes Better
- Search Results: 25580
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison



Richard S.
3/13/2025
Kate, Thank you for the info and spindle measure chart. We are going to Colorado, and then Montana for a few weeks this summer, and wanted to have some added confidence for this 12yr old ORV.