Will etrailer Axle Fit 5x7 DK2 Trailer
Updated 10/30/2025 | Published 02/22/2025
Products Featured in This Question
Question:
Hello i have a 5x7 dk2 trailer. Just wanted to know if the axle Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60 Long - 2,200 lbs Will fit on there?
asked by: Mario R
Expert Reply:
Hey Mario! The # e22GR might fit but I don't have the axle information for that trailer. I recommend getting your hub face measurement along with the spring center measurement to see if it matches. I can try to reach out to DK2 but they haven't responded to myself or others on my team for quite a while now so measuring is the best solution.
If the 60" length matches but you have a different spring center measurement you will need to cut off the spring seats and weld on # TRSS175 to match your trailer. I went ahead and attached a video below which explains how to measure for your reference. If you need anything else don't hesitate to reach out in the comments.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Recommended Replacement Tire for DK2 4x8 Folding Utility Trailer
- Q&A: Availability Of 15" Rim With 5 on 5-1/2" Bolt Pattern
- Q&A: Recommended Solution to Bolt on Safety Chains to Utility Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Q&A: How to Measure Width and Bolt Pattern on a Trailer Wheel
- Article: Where to Position the Trailer Axle?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Hitch Installation Tips
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure a Trailer Axle
Robin H.
10/30/2025
Hey Mario, did you get a chance to take those hub face and spring center measurements for your DK2 trailer? Once you had those numbers, did the 60-inch axle end up being a good match? Your update could make it easier for the next person with the same trailer.