bing tracking image
Q & A Icon

Troubleshooting Curt Echo Not Powering On  

Updated 10/30/2025 | Published 02/19/2025

Question:

I recently got a CURT Echo brake controller. I paired it and used it perfectly fine. Second time I used it, same car, same phone, same trailer the Echo couldn’t be paired to. The hazards and turn signals work on the trailer, so power is getting through. There’s also no light turning on at all on the echo. I’m lost as to what to try now.

0

Expert Reply:

Hey James; have you checked your 12V power? If not, I recommend using a tester like the # PTW2993 to see if you have power on your vehicle connector. Since the power light is not turning on it sounds like there is no power on the 12V circuit. The lights would pass through regardless. If you have power here then it is likely an internal issue and I would reach out to Curt or whoever you bought it from to replace it under warranty.

expert reply by:
0
Robin H
Curt Echo
Curt Echo
(click to enlarge)
Robin H. profile picture
Etrailer Expert

Robin H.

10/30/2025

Hey James, were you able to test the 12V power on your vehicle connector with a circuit tester? Knowing what you found could help others who run into the same issue with their Echo brake controller.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>