Overall Height for the Round A-Frame Trailer Jack
Updated 10/30/2025 | Published 02/12/2025 >
Question:
Hi. Is the height of this TJA-2000S jack 23 3/4, from ground to the top of jack? Thanks. Dave
asked by: Dave B
0
Expert Reply:
Hey Dave, yes the height of the Round A-Frame Trailer Jack # TJA-2000S-B is 23 3/4" from the ground to the top of the jack.
If there is anything else I can do for you, or if you have any other questions please let me know!
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Round A-Frame Trailer Jack - Sidewind - 15" Lift - 2,000 lbs - Black
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Sidewind Jack
- 1001 - 2000 lbs
- Manual Jack
- 15 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- etrailer
more information >
Continue Researching
- Shop: etrailer Square Sidewind Trailer Jack - Foot Release Drop Leg - 13-1/2" Lift - 12,000 lbs
- Shop: Round A-Frame Trailer Jack - Sidewind - 15" Lift - 2,000 lbs - Black
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs - Black
- Q&A: Replacement Drop Leg Needed for a RAM 2000 Series A-Frame Jack
- Q&A: Replacement For Dometic AC 59516.331
- Q&A: How Do I Know If My 10k AL-KO/Hayes Brake Caliper Is For The Right Or Left Side Of A Trailer
- Q&A: Does the etrailer Sidewind Trailer Jack for a A-Frame Trailer Come w/out a SnapPad?
- Q&A: What Replacement Rotors and Brake Pads do I Need for My Kodiak Disc Brakes K2HR12A11-120DW?
- Q&A: What is Best Trailer Jack for Use in Saltwater
- Q&A: Does Pin Hold Foot In Place On etrailer Manual Sidewind Trailer Jack
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Performance Chips and Modules
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Jacks
- Article: How to Install an RV Awning From Scratch



Jerred H.
10/30/2025
Hey Dave, did the 23 3/4-inch height on the Round A-Frame Trailer Jack end up working for your setup? Knowing how it fit could help others checking the same measurement.