Recommended Replacement Axle for a Camper Trailer
Updated 10/30/2025 | Published 02/11/2025
Products Featured in This Question
Question:
Hello, I had a question about hub length and safety. My current camper trailer has a hub length of 73 in with a 4 lug hub. Also, 55-in spring center measurement. I am interested in going up to either an 85 in or 89-in hub face and keeping the 55-in spring Center and also a five lug hub for potentially a larger tire size. I currently am using 12-in wheels. Im wondering if the increase of about 16 in would offer more stability, less stability... Or maybe its not safe at all. Thank you, and I look forward to hearing your reply.
asked by: Brian P
Expert Reply:
Hey Brian, to go with a longer axle setup you can use the Trailer Axle with Idler Hubs # e65GR. This axle has a 5 bolt pattern, an 89" hub face measurement, but a 74" spring seat measurement. Since your spring seats are at 55" you'd need to cut off these ones and re-weld them at 55" to match your spring seats.
What kind of trailer do you have? Also, If there is anything else you need help with, please feel free to let me know!
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Availability Of 15" Rim With 5 on 5-1/2" Bolt Pattern
- Q&A: Recommended Trailer Axle For Haul Master 4x8 Foot Trailer
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: Looking for Replacement Trailer Axle that is 48 inches Between Spring Seats and has 4 Bolt Pattern
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Jerred H.
10/30/2025
Hey Brian, how did things go with the 89‑inch axle setup you were considering for your camper trailer? Were you able to re‑weld the spring seats to match your 55‑inch spacing? Your update could make it easier for others thinking about a similar upgrade.