What Height of RaceRamp is Needed to Match up to Trailer for Helping Loading Corvette
Updated 10/30/2025 | Published 02/10/2025
Products Featured in This Question
Question:
How do all of these ramps compare to each other? Im struggling to determine which one I need to help my corvette get into a trailer. Trailer ramp s off about 6inch to the pavement. thanks. RR23JE, RR75JE, RR65JE, RR85JE
asked by: Nathanel
Expert Reply:
Hey Nathanel, basically you want to match the notch height of the ramps to the distance from the ground to the bottom of the rear of your trailer as the notch needs to fit under that. For example the part # RR23JE has a notch height of 6 inches and a total ramp height of 7 inches.
The part # RR75JE has a notch height of 5 inches which is the other option that I think would match the closest without knowing more about your setup.
Product Page this Question was Asked From
Race Ramps Tilt Trailer Ramps - 5.5 Degree - 7" Tall - 14" Wide - 74" Long
- Car Ramps
- Loading Ramps
- Car Hauler Ramps
- 6000 lbs
- No Attachment
- 14 Inch Wide
- 74 Inch Long
- Foam
- Race Ramps
more information >
Continue Researching
- Q&A: Can Timbren Axle Less Kit Install on I-Beam Trailer Frame
- Q&A: How to Change Spring Center on e65GR Trailer Axle
- Q&A: Troubleshooting No Power To Trailer Brakes When Trailer Connected To New GM Truck
- Article: Trailer Lighting Requirements
- Q&A: How to Determine Trailer Lighting Requirements
- Q&A: How Many Tail Lights Come with Diamond LED Trailer Tail Light w/ Reflector DG52720PB
- Q&A: Brightest Surface Mounted Trailer Tail Lights
- Q&A: Is It Better To Install the Long Red Conspicuity Reflective Tape In Colder or Warmer Weather
- Article: Trailer Wiring Diagrams
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Maintenance Schedule
- Article: Where to Position the Trailer Axle?
Jameson C.
10/30/2025
Hey Nathanel, how did things go with the Race Ramps for your Corvette and trailer setup? Did the notch height on the RR23JE or RR75JE end up matching your trailer best? Your update could make it easier for the next person trying to bridge a similar height gap.