Do the Diodes in the Curt Custom Tail Light Wiring Kit Keep the Braking System from Activating?
Updated 12/02/2024 | Published 11/30/2024
Products Featured in This Question
Question:
Do the diodes on this harness protect the Demco Stay and Play from operating when the coach is not connected? Or do I have to still install the demco diodes? I was driving our toad today and the demco switch was on by accident. During an off ramp on the highway the brakes applied. I thought that would not happen if the coach was not connected? Thanks
asked by: Dave C
Expert Reply:
No, they do not when you're not hooked up but that's not the issue. The Demco Stay-IN-Play Duo item # DM86VR needs the stop light signal from your motorhome in order to activate. If the system is activating when you're not connected then something likely is wired incorrectly. I would recheck your wiring to make sure everything is hooked up right.
I have attached a diagram below to help you out.
The diodes on the Curt Custom Tail Light Wiring Kit for Towed Vehicles item # C96JR prevents exactly what you're describing from happening when you're flat towing your Jeep. There wouldn't be any signal to activate your brakes if this harness isn't connected.
(click to enlarge)
Product Page this Question was Asked From
Curt Custom Tail Light Wiring Kit for Towed Vehicles
- Flat Tow Wiring Harness
- Plugs into Vehicle Wiring
- Wiring Harness
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt Custom Tail Light Wiring Kit for Towed Vehicles
- Search Results: base plate for tow bar
- Search Results: hitch riser
- Search Results: toad brakes
- Video: etrailer Invisible Base Plate Kit Complete Installation - 2023 Jeep Wrangler 4xe
- Search Results: tow bar base plate
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Search Results: flat tow battery charger
- Search Results: falcon 5250
- Shop: Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Search Results: wiper blade covers
- Shop: Roadmaster Guardian XL Rock Shield for Direct-Connect Baseplates
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Shop: Curt RVi Series Towed Battery Charger+ for Flat Towing
- Q&A: Tow Bar Lighting Kit Recommendation for 2018 Jeep JL Wrangler Unlimited
- Video: Installation of the Blue Ox Patriot Portable Flat Tow Brake System on a 2021 Jeep Wrangler Unlimited
- Video: Installation Guide for the Roadmaster Direct-Connect Base Plate Kit on a 2021 Jeep Wrangler 4xe
- Video: Installation: Curt Custom Tail Light Wiring Kit for Towed Vehicles on a 2024 Jeep Wrangler Unlimited
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Video: Set up: Roadmaster Crossbar-Style Base Plate Kit on a 2022 Jeep Wrangler Unlimited
- Video: Roadmaster Nighthawk All-Terrain Tow Bar with LED Lights Comprehensive Review
- Video: Review of Roadmaster Hitch Adapters - Dual Hitch Adapter - RM68BQ
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Correct Roadmaster Seat Adapter for BrakeMaster System on a 2018 Jeep JL Wrangler Unlimited
- Q&A: Can BrakeMaster Breakaway Kit be Easily Removed from One Vehicle to Another Vehicle
- Q&A: Can the 2024 Jeep Wrangler Curt Flat Tow Harness Work with Demco Stay-IN-Play Brake Kit
- Q&A: How to Run a Charge Line to a 4-Way Connector
- Q&A: Can Flexible Rubber Propane Hose be Used in RV
Dave
12/2/2024
I was thinking since I do not have the diodes installed, when the jeep brake lights are applied the signal is backfeeding up the wire. The Demco would have no way of knowing if that signal is coming from the motorhome or the jeep brake lights. I have checked everything and it appears I have everything installed correctly except I did not install the demco diodes because I thought the curt diodes would do the same thing. The brakes work great when I am towing the jeep. However without the motor home connected, if the demco switch is on every time the jeep brake lights come on the demco operates the brakes. this is even true if you put the hazards on, the brakes operate with every flash of the lights.