How Thick Are Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs Hangers
Updated 12/15/2025 | Published 11/18/2024
Question:
On kit APTT6SE, what is the material thickness of the hangers? Thank you.
asked by: Dave
0
Expert Reply:
Hi Dave; the hangers that come with the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs # APT6SE are 1/4" thick.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Move Axles Under Leaf Springs on a Horse Trailer with Slipper Springs
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Q&A: Solution for Valcrum Oil Cap for Trailer Axle that is Leaking Oil
- Q&A: How Are Slipper Springs Attached to Equalizer and Hangers
- Q&A: Looking for a 12" Slipper Spring Equalizer, and Heavy Duty Shackle Kit for My Tandem Axles?
- Q&A: Should Bolts be Tightened Down Completely on Leaf Spring Hangers
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Robin H.
12/15/2025
Hey Dave, how did the 1/4-inch thick hangers on the tandem-axle hanger kit work out for your setup? Knowing how they held up could help others choosing the same kit.