Since we have started carrying the Yakima Rack and Roll trailer #Y08107 I have not heard any complaints regarding the wheel bearings failing and only a few instances where people wanted to replace the wheel assembly. If you need to replace your…
If you check out the picture I attached you will see where I pointed out where the sticker is that has the VIN on the Yakima Rack and Roll trailers like the part #Y08106. If somehow the sticker is worn off or unreadable my contact at Yakima said that…
I went out to the warehouse and pulled a Rock Mounts Brass Knuckles bike carrier #RKY1201 and assembled it to measure it for you. From the center of the fixed front mounting point to the nearest end of the carrier it is 18 inches. And from the center…
You are correct, the Replacement Tail Block Locking Assembly #8880334 is only for the 2015 and up model year Rack and Roll trailers. According to Yakima, the reason is the thickness and length of the shaft was increased, so it's a different size.…
Replacement Left Side Fender for Yakima Rack and Roll Trailers - Qty 1 #Y8880164 and right side #Y8880163 are intended to be priced equally. The reason why they are not at this moment is that the right fender is on sale in our system. Why they both…
The Yakima Rack and Roll trailer part #Y08106 doesn't have any safe jacking points on it so if you were in need of changing the spare you'd have to remove the kayak and raise the trailer by hand.
Yes, the Yakima FrontLoader #Y02103 is the most current version. A new version was released pretty much immediately following the recall. There's also been an additional update since then so now the rack will accommodate 27-1/2 inch wheels as…
Thank you for catching the error in our description of the Yakima FrontLoader Wheel Mount Bike Carrier #Y02103. Yakima's specs do indeed shows 3-inch-wide tires will fit and my measurement of this rack in our warehouse confirms. We will make this…
I went to our warehouse and pulled a Yakima FrontLoader Wheel Mount Bike Carrier, part #Y02103 to get the measurement you asked about. I have attached a photo of the front mount that has the width noted. It is 7 inches wide outside edge to outside…
The correct replacement amber beehive light you would need for your Yakima Rack and Roll Trailer part #Y08106 that you referenced would be the #Y8880187.
Filter Results
