Replacement for 3,500 lb Lippert Axle with 92" Hub Face and 80" Spring Center Dimensions
Updated 12/22/2025 | Published 10/23/2024
Products Featured in This Question
Question:
I have a Lippert axle with axle number LCI35 SI 92 80. What is the part number of a replacement axle with hubs for this Lippert axle?
asked by: Carl S
0
Expert Reply:
Hey Carl,
The Trailer Axle w/ Electric Brakes # e52SR will fit in place of your current Lippert 3,500 axle, but it will be about 3" wider which translates to 1-1/2" on either side. This comes with the hub/drum and brakes so if you're only needing idler hubs then the part # e52GR is the alternative.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Trailer Wiring Diagrams
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko
- Q&A: How to Choose a Replacement Axle for a 1980 Apache Ramada
- Q&A: Looking for Heat Pump for Coleman Mach AC Unit
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Foot Plate for a Lippert Jack 359278
- Q&A: Replacement 3,500 Lb Dexter Axle D4518710
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Most Popular Wheel Bearings
Kate F.
12/22/2025
Hey Carl, how did the fit turn out with the 95-inch trailer axle you went with? Your update could make it easier for others replacing a Lippert 3,500 axle.