Most Budget-Friendly Way to Help Sag on 1999 Ram 1500

Question

Question:

Hello, They don't make EZ 990 helper springs for my 1999 1500 Ram? What's the cheapest easiest way to help my old truck with sag? Thank You.

asked by: Joe

0

Expert Reply:

Hi Joe,

Hellwig does actually make the EZ-990 helper springs that fit your 1999 Dodge Ram 1500, with the Hellwig EZ-990 Helper Springs - Above Axle # HE68VR.

These are also the most budget-friendly option for you.

expert reply by: Kyle S

0

Robin H.

12/22/2025

Hey Joe, how did the Hellwig EZ-990 helper springs work out on your Ram 1500? It’d be great to hear if they helped with the sag like you were hoping. Your update could make it easier for others with older trucks.

Answer 1

I reached out to both Firestone and Air-Lift and confirmed that the air helper spring kit you have on your 2002 Chevrolet Silverado is the Air Lift Ride Control Air Helper Springs - Rear Axle #AL59501, but unfortunately the air springs for this kit…

view full answer...

Answer 2

Some of the rear axle air bag kits we offer are compatible with 5th wheel hitch installations. It depends on the specific truck version you have. For instance, if your 2001 Dodge Ram is a 2WD or 4WD 1500 with standard height then you could use kit…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 7

Hey Bruce! The outside dimensions of the Double Rocker Switch #37212015 including the faceplate are 2.86" wide x 2.437" high. It is also available in black #37212235 and brown #37212145. What are you using the switch for?

view full answer...

Answer 8

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

view full answer...

Answer 9

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

view full answer...

Answer 10

Hey Adam, welcome back! Since your 1997 Ram 3500 has the B&W Turnoverball item #BWGNRK1394 installed, you'll need the Pacbrake Alpha HD Air Bag Suspension Kit item #PB82FV. This set of air bags has a 5,000 lbs support capacity, which is the…

view full answer...

Most Budget-Friendly Way to Help Sag on 1999 Ram 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching