Adhesive to Use with Camco RV Gutter Spouts

Question

Question:

I have used these in the past to extend the reach of my existing spouts. I cut off one end and glue to the underside of the existing spout. But Im having trouble finding an adhesive that consistently holds. Any suggestions on what would work well with polypropylene and be weather and temperature resistant?

asked by: Thomas P

0

Expert Reply:

We don't carry it but I would try Loc-Tite Power Grab. We had great luck with it so it would be what I would go with.

expert reply by: Jameson C

0

Jameson C.

12/22/2025

Hey, were you able to get good results using the Loc-Tite Power Grab on your gutter spouts? Knowing how it held up to weather and temperature changes could help others trying the same fix.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 7

Hey Vicky! Yes, the Meyer HomePlow Residential Hydraulic Snowplow #ME53FR includes the wired pistol grip controller. See the attached picture. You can use the plow on your 2003 Silverado as long as you have a front hitch with a 2" receiver.

view full answer...

Answer 8

Hey Greg, yes the Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel #AM20258 that you referenced would work with a Load Range E tire ST175/80R13 like you mentioned.

view full answer...

Answer 9

Hello Tony, thanks for reaching out. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is what you will need for tandem 7K axles. You will also need new U-bolts part #APUBR-8. As far as converting to disc brakes,…

view full answer...

Answer 10

Hi Terry! As long as you have something like the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #31221 on the front of your 2007 Chevy Colorado 4x4, you can definitely use the Detail K2 Elite Snowplow for 2" Hitches - 82"…

view full answer...

Adhesive to Use with Camco RV Gutter Spouts

Product Page this Question was Asked From

Continue Researching