What Parts Come With MORryde X-Factor Crossmember for Standard Frame Hangers

Updated 09/08/2024 | Published 09/02/2024

Products Featured in This Question

MORryde X-Factor Crossmember for Standard Frame Hangers

(263)

$156.59

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(1915)

$125.09

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps

(1915)

$116.31

Question:

I dont see a specific parts list. Do the wet bolts for the hanger installation come with brass bushings? Also, I see this kit is compatible with the morryde cre 3000 shackle. I assume this kit will fit my 23 solitude 5th wheel? Thanks. Nick

asked by: Nick

Expert Reply:

Hi Nick; the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR includes the following parts:

2- 7/16-20 Flange Locknut GRB Zinc
2- 9/16-7/16-20 x 3.4 Wet Bolt GR5 Zinc
20- 3/8-16 Flange Locknut GR8 Zinc
20- 3/8-16 x 1 Flange Bolt GR8 Phos & Oil
4- 5/16-18 x 3 1/2 Flange Bolt GR8 Zinc
4- 5/16-18 Flange Locknut GRG Zinc
2- Hanger Bracket Plate
2- Spacers
1 -Inner Hanger Bracket Adapter
1- Outer Hanger Bracket Adapter
1- X-Factor Inner Channel
4- X-Factor Outer Channel
4- Spacer Tube

This doesn't include brass or bronze bushings but you should already have them in the shoulder bolt holes since you have the CRE 3000. The crossmember has an adjustable length of 61" - 79-1/2" so I'm sure it will fit but it doesn't hurt to double check. It is compatible with MORryde CRE systems so it will work with your CRE 3000 equalizers.

If you don't already have it, this would also be a good time to add the MORryde Suspension Upgrade Kit. This kit comes with wet bolts, bronze bushings, and 1/2" thick shackle straps so they'll last a lot longer than your standard parts. You will need to measure your current shackles center hole to center hole to find the right kit. If your measurement is 2-1/4" you need the # MR46ZR and for 3-1/8" the # MR76ZR.