MORryde Wet Shoulder Bolt Not Taking Grease
Updated 08/07/2025 | Published 07/07/2025
Products Featured in This Question
Question:
About 2 years ago I bought and installed the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4inch Long Shackle Straps. Now, there is one of the fittings that I just cant get to take any grease. Ive tried heating it some and replaced the fitting. Do you have any suggestions on getting it to take grease? Thanks
asked by: Tony G
Expert Reply:
Hi Tony; it sounds like you have some dirt/debris lodged in there which is preventing the grease from going through. Since you already replaced the fitting I don't think cleaning it further will work so I would replace the whole bolt with the Replacement Wet Shoulder Bolt # MR92HR (9/16" x 2-15/16") or # MR52HR (9/16" x 3-3/8").
(click to enlarge)
Product Page this Question was Asked From
Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3-3/8 Inch Long
- MORryde
more information >
Continue Researching
- Search Results: morryde x~factor
- Search Results: moryde x factor
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Search Results: morryde x~factor crossmember
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Search Results: sewer hose storage tube
- Search Results: flange nuts
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Shop: Replacement Grade 5 Flange Lock Nut for MORryde Suspension Upgrade Kits - 1/2"-20 - Qty 1
- Shop: MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications
- Shop: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Video: Review of MORryde Trailer Suspension Parts - MR85DR
- Video: Review of the Replacement Wet Shoulder Bolt
- Shop: Replacement Flange Nut for Dexter Trailer Suspension Kits
- Search Results: morryde trailer suspension parts
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Q&A: Will 8k Leaf Springs Lift Trailer With 7k Axles
- Q&A: Can I Go With A Higher Capacity Spring On My Keystone Trailer?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Are the Wet Bolts in the MORryde Suspension Upgrade Kit a One Time Use
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does the MORryde Replacement Wet Shoulder Bolt Come W/ a Nut
- Q&A: Is Correct Track Trailer Alignment and Lift Kit Compatible With MORryde Suspension Upgrade Kit
- Q&A: Reverse Lockout For a Dexter DX 12.5 Disc Brake Actuator
- Q&A: Difference Between 30205 and L44643 Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
Robin H.
8/7/2025
Hey Tony, how did replacing the bolt work out for you? I'm curious to know if it solved the issue with the grease not going through. Your experience could really help others facing a similar problem!