What Winches Can Be Used With The Dutton-Lainson Drill Adapter DL6456
Updated 09/09/2024 | Published 09/01/2024
Products Featured in This Question
Question:
Is there a drill or cordless impact driver available for this winch?
asked by: John A
0
Expert Reply:
Hello John. Dutton-Lainson does make a drill adapter part # DL6456 but this only works with the DLB style of Dutton Lainson winches with the automatic brake, so it will not work with the # DL15440 you mentioned. For a compatible winch take a look at the Dutton-Lainson Hand Winch w/ Automatic Brake # DL15721. This will work with the # DL6456 drill adapter.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 3,200 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- 2001 - 4000 lbs
- Standard Hand Crank
- Two Speed Winch
- Wire Rope
- Polyester Strap
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs
- Q&A: How To Determine Fit of the 3,200 Lb 2-Speed Boat Trailer Winch
- Article: Hand Winches
- Q&A: Comparing Fulton XLT and Dutton Lainson 2 Speed Winch
- Q&A: Difference Between Curt 2-Speed Boat Trailer Winch and Fulton High-Performance 2-Speed Trailer Winch
- Q&A: Boat Trailer Winch to Replace Old Shelby 5470A Winch
- Q&A: Is Dutton-Lainson DL2500AB Pulling Winch Part # DL14830 Correct Size Winch for 3020-lb Boat
- Q&A: Boat Trailer Winch Recommendation for 2,400 lb Console Boat
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Q&A: Troubleshooting EOH Brakes With Hydrastar Actuator Not Working With 2024 Ford F-450
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Article: Boat Trailer Guides: Which are the Best?
John A.
9/6/2024
Thank you Jesse. I contacted D-L and inquired about this. You won't believe this. The engineer said a drill adapter doesn't work well with letting the strap out so they haven't made one. Drill adapters are used after you pull the strap out (and the handle is off) when the boat is half on the trailer. Then use an adapter on a drill and and wind the boat in. Makes it easier for us old guys.