Recommended Replacement Braking Assemblies for an Axletek 12HFB-GG
Updated 08/29/2024 | Published 08/25/2024
Products Featured in This Question
Question:
Over the weekend I heard a lot of noise from my brakes. I took them apart and the adjuster blew apart and was rattling around in the drum. Question 1, is there any warranty on parts? I just installed over the winter and only used them a few times this season. If not Question 2, what model do I need to buy? I dont see mine listed any loner, pics dont look the same and the numbers are close but not exact. My tag says B12H-51, Axletek 12HFB-GG. I need a replacement quick so I can use trailer for the holiday weekend. Looking for guidance. Thanks
asked by: Ben B
Expert Reply:
Ben, for your Axletek 12HFB-GG you are going to need the etrailer Electric Trailer Brakes # AKEBRK-7-SA to replace your brakes. These brakes are 12" x 2" in diameter, will work with both 5.2k to 7k axles, will work with wheels that are 14-1/2", 15", 16", and 16-1/2", and has a 1 year limited warranty
Product Page this Question was Asked From
Hydraulic Trailer Brake - Uni-Servo - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: etrailer Hydraulic Trailer Brakes - Free Backing - E-Coat - 12" - Left/Right - 5.2K to 7K
- Shop: Hydraulic Trailer Brake - Uni-Servo - Free Backing - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Search Results: axletek
- Search Results: gs~225odl
- Search Results: axel grease
- Video: Checking Out the Grease Seal
- Video: Complete Breakdown of the Hydraulic Trailer Brake
- Q&A: Replacement Hub and Drum Assembly for 2006 Karavan Trailer
- Shop: Dexter Hydraulic Drum Brake Assembly - Free Backing - 12" - Left Hand - 7,000 lbs
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Mystik JT-6 High Performance Synthetic Grease - 1 Lb Can
- Q&A: Replacement Brakes and Hub/Drum Assembly for Eagle Boat Trailer With 6k Axle
- Q&A: Replacement Axle, Hubs, and Brakes for a ShorLandr Dual Axle Trailer
- Q&A: Looking For Replacement Slipper Springs For My 7k Dexter Axle
- Q&A: Replacement Titan Model 60 Master Cylinder for Part 23361
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
- Article: How to Measure a Boat Trailer Axle
- Q&A: Looking for Replacement Wheel and Tires for Shorelandr Trailer Tire Size 20.5X8.0X10
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
Ben B.
8/29/2024
Bryce Thanks but I figured out what I needed, took some digging on your site but I was able to figure it out and place a new order. With that being said I was also able to find the previous order number for the brake that failed. I have no idea how or why it failed, the adjuster simply broke into several pieces. What do I need to do in order to submit for warranty? I installed in the April timeframe and started using it regularly as the boating season started in June. That's only 10 trips or so and needed replaced due to failure. Order #120659393 Placed On: 4/2/24 Ship Status: Delivered Delivery Date: 4/4/24