Replacement Axle Recommendation for a Pontoon Trailer
Updated 01/27/2026 | Published 08/16/2024
Question:
Looking For a axle for my partoon trailer 37 inch to out side hubs 24 center to Spring.
asked by: Peter A
Expert Reply:
Hey Peter, thanks for reaching out!
That's a pretty short axle and while we do have a replacement option, it won't be a standard axle replacement - for that you'll have to reach out to your local trailer shop or RV dealer.
The replacement we have is the 2K Timbren Axle-Less Trailer Suspension w/ Idler Hubs # A20RS545 which is an alternative style with rubber springs instead of standard leaf springs. The other thing about this is that if you have 2 axles you'll need to replace both in order for the suspension to work correctly.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Q&A: Measurement of Hole Spacing on Torflex Lift Kit # K71-725-02
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Lock for MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Article: Trailer Tire Sizing
- Q&A: Will Fulton Fold-Away Coupler Hinge Kit Work on Aluminum Frame Trailer
- Q&A: Swing-Away Tongue For Aluminum Trailer With Galvanized Steel Tongue
- Article: Where to Position the Trailer Axle?
- Article: Trailer Lighting Requirements
- Article: How to Raise Your Travel Trailer Height
- Article: Holiday 2025 | RVers’ Favorite Gear & Road Picks
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
Josh B.
1/27/2026
Hey Peter, were you able to find an axle setup that worked for your pontoon trailer? Knowing what solution you went with could help others trying to match similar measurements.