Demco Kar Kaddy Tire Tie Down Strap Replacements

Question

Question:

What number is for the Kar Kaddy Tire Tie Down Straps ?

asked by: Randy H

0

Expert Reply:

Hey Randy, the correct wheel tie downs for a Demco Kar Kaddy is the part # DM03528-93.

expert reply by: Jameson C

0

Jameson C.

2/3/2026

Hey Randy, did the wheel tie downs for your Demco Kar Kaddy work out as expected? Knowing how they fit could help others looking for the same setup.

Answer 1

In order to prevent the steering wheel in your 2017 Chevy Sonic from locking up when flat towing it behind your RV, you will just need to make sure to follow the steps in the vehicle's owner's manual, specifically the proper key position. I…

view full answer...

Answer 2

Hi Michael, I have exactly what you are looking for. You'll want the KarKaddy SS Chrome Tire and Wheel Combo part #5968. According to Demco, they have a special wheel offset for their KarKaddys so any old chrome trailer wheel will not work in its…

view full answer...

Answer 3

Demco doesn't have a big list out there of what tires work with the 3-Point Standard Wheel Tie-Down Strap #DM03528 (because that would be huge) but they do have a calculator that can be used to determine what size you need for your tire size. If…

view full answer...

Answer 4

I have an answer for you. I went ahead and reached out to my contact at Demco, and he said that depending on the ratchet-style you have on your 2019 Stahl dolly, you might need a different style of strap than the Demco Strap #DM03528-93 to fit your…

view full answer...

Answer 5

The lug nuts on the dolly are 1/2 inch diameter lugs like what trailers often use so the correct locking lug nuts would be the part #RG01-150.

view full answer...

Answer 6

I spoke with my contact at Demco and they offer three different sizes for the replacement wheel straps for their Kar Kaddy. For standard you would want the #DM03528, for small #DM03528-81 and for large #DM03528-93. It sounds like you are looking for…

view full answer...

Answer 7

Thanks for the pictures! We do have a different style ratchet option for your older tow dolly but you will need to measure the size of the bracket on your current ratchet. The most likely option we have is the Replacement Left Side Ratchet Winch…

view full answer...

Answer 8

To bleed the brake lines with your Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout #DM8750311 you'll need to complete the following steps: 1. First raise the tongue of the trailer 4" to 6". 2. Loosen or remove two 5/16”…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Demco Kar Kaddy Tire Tie Down Strap Replacements

Product Page this Question was Asked From

Continue Researching