Will B&W Tow & Stow 2-Ball Mount With 5" Drop & 5-1/2" Rise Fit With Rock Tamers
Updated 01/19/2026 | Published 07/30/2024
Products Featured in This Question
Question:
Ive got a 2016 Yukon Denali, the receiver is a little recessed and there is a flange for mounting the receiver cover if you not trailering. this hitch looks perfect but I believe I wont have space to mount my rock tamers, the collar is 1 inch ? ? I need a 3 adjustable to 4 if need be.
asked by: Joshua D
Expert Reply:
Hey Joshua,
You can use the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5.5" Rise # BWTS10037BB with your Rock Tamers. Those require just 1" from the face of the hitch to the back of the ball mount, and the distance from the furthest pin hole to the back of the # BWTS10037BB is 4-1/8".
The standard distance from the hitch pin hole to the front of a 2" receiver is 2-1/2" so that leaves plenty of space for your Rock Tamers. The only other thing I recommend is getting a hitch lock for the Tow & Stow if you don't already have one. For that use the Hitch Lock # e98882.
Product Page this Question was Asked From
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5.5" Rise - 10K - Browning
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- B and W
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Fitting So that Air Lift Air Bag Kit Can be Inflated by a Single Valve
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Which Hitches are Made in the USA
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Dimensions Of Holes On Lippert 1621 5th Wheel Pin Box
- Q&A: How To Measure For Hub-Face And Spring Center Measurements On An Axle
- Q&A: Distance from Bumper to Top of Curt Trailer Hitch C15703 on a 2005 Chevy Silverado 2500
- Q&A: How is Rise/Drop of B&W Tow & Stow Ball Mount Measured
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Repair Kit for 12000-lb-Rated Bulldog Square Tube Jack
- Q&A: Replacement Screw and Nut for Bulldog 10K / 12K Square Trailer Jack
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Install E-Track in 3 Easy Steps
Jerred H.
1/19/2026
Hey Joshua, how did the fit with the B&W Tow & Stow ball mount and your Rock Tamers turn out on your Yukon Denali? It sounds like the spacing should have worked well. Sharing your results could help others setting up a similar hitch.