Replacement Door Latch for 2001 Featherlite Horse Trailer Dressing Room Door

Question

Question:

I’m looking for a door latch for my 2001 featherlight horse trailer my dressing room door latch broke

asked by: Daniel R

0

Expert Reply:

Hi Daniel; the # 295-000019 you were looking at may fit but we can only guess without knowing the dimensions of your cutout. This fits doors that are 1-1/4" to 1-1/2" thick with a cutout that is between 2-1/2" to 3" wide x 3-1/2" to 4" tall.

If you have a different cutout dimension please let me know and I will see if we have a replacement that is a better fit. I also attached a link to all of our available door locks below which can be filtered by latch cutout size.

expert reply by: Robin H

0

Daniel R.

7/7/2024

5 7/8 wide by 4 5/8 high

Reply

Robin H.

7/8/2024

@DanielR the closest thing we have to that is the # BA65FR. This requires a cutout that is 5-1/4" wide x 4-1/2" tall so it will fit your existing cutout. the face of the latch is 5-7/8" wide x 5-1/2" tall so it has the dimensions to cover the rest of the opening. The only other option would be to contact a manufacturer like Global Link, Bauer, or Lippert to see if they have one matching your current lock or if they can custom make one for you.

Reply

Daniel R.

7/8/2024

The measurements I gave you was the hole in the door after I took the door latch off @RobinH

Reply

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 8

Hey Sean, yes you can definitely use a stand alone system like a single-acting hydraulic pump to power a hydraulic trailer jack like the single action Stillwell lineup we just started carrying. For the Stillwell Atlas IV 10K Hydraulic Trailer Jack w/…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Door Latch for 2001 Featherlite Horse Trailer Dressing Room Door

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching