Idler Hubs to Use with Hydrastar Disc Brake Kit for 7k Axles # HSE7K-TR1SO
Products Featured in This Question
Question:
I have a 2007 Kaufman trailer mini 4 or 4 car trailer with 7k tripple axles. U bolts screws are bolted underneath the axles and not on the top. It is electrical brakes right now and has 5 bolts threads on the end of the axles. I know this one might work with my trailer and I think I will an idler hubs in order to slide or the rotors into it. What kind of idler hubs would I need ? And will this work on my trailer conversion.
asked by: Douglas
Expert Reply:
Hey Douglas, you are correct you would need an idler hub to go along with the Hydrastar Disc Brake kit part # HSE7K-TR1SO that you referenced. For that the Dexter idler hub part # 42865-KIT would be what you would need as it is the correct capacity, bolt pattern, and wheel stud size at 1/2 inch.
This will work perfectly fine with the setup you have on your Kaufman car hauler.
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2
- Video: Ultimate Overview of the Hopkins 7-Way Blade-Style Connector w/ Molded Cable and LEDs
- Video: What to Know About the Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers
- Video: Hands-On with the Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers
- Video: Comprehensive Review: Buyers Products Coupler w/ 3-Position Adjustable Channel
- Shop: Easy Grease Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased
- Shop: 7-Way Molded Trailer Wire Connector, 6' Long
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Shop: Hopkins 7-Way Blade-Style Connector w/ Molded Cable and LEDs - Trailer End - 6' - Auto Standard
- Search Results: 2 inch channel coupler
- Search Results: straight tongue trailer coupler
- Search Results: 2 inch channel straight tongue trailer coupler
- Search Results: hydrastar trailer brakes
- Search Results: channel only straight tongue trailer coupler
- Search Results: torsion spring
- Search Results: optronics trailer lights
- Video: Feature Review Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-865-7-2-EZ-K
- Q&A: Install Time for HydraStar HSE7K-T1SO Disc Brake Kit
- Q&A: 7k Slip On Disc Brake Kit that Fits Dexter Axles of
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: The Low-Down on the Dexter Disc Brake Kit
- Q&A: Comparing HydraStar Disc Brake Kits with Actuator for Tandem Axle Trailers - 7K
- Q&A: Is There Slip On Style Hydrastar Disc Brake Kit for 7k Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Will Hydrastar Disc Brake Kit Work With Dexter Hub for 7k Axle
- Q&A: Brake Line Size for HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers
- Q&A: Does Hydrastar Disc Brake Kit for 7k Axles Fit Lippert and Dexter Axles
Doug B.
7/10/2024
Thank you for your reply Mr. Jameson and the part number you provided .It was very helpful.