How Many Staples Do I Need to Install the CE Smith Deluxe Marine-Grade Carpeting?
Updated 02/03/2026 | Published 06/24/2024
Question:
When building new trailer bunks, new treated southern pine with galvanized staples 3/8 x 1/2. Staples spacing? How many per ft?
asked by: Brian S
0
Expert Reply:
You will want to use 1/2" stainless steel staples every 2 to 3" to install the CE Smith Deluxe Marine-Grade Carpeting item # CE11372. Make sure you only put staples on the back side of the bunks where they won't touch the boat hull.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Charcoal - 12' Long x 11" Wide
- Boat Trailer Parts
- Bunks
- Bunk Carpet
- 11 Inch Wide
- 12 Feet Long
- CE Smith
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?
- Q&A: Can Pressure Treated Bunk Boards Damage Boat Pontoons
- Q&A: Recommended Leaf Spring Bushings and Shackle Bolt with Locknut
- Q&A: Looking for Replacement Hinge Plate for MORryde Step Setup on 2021 Venture Sonic Lite SL16 VUD
- Q&A: Can Bunk Boards Be Built Using Pressure Treated Lumber
- Q&A: Correct Size Carpet for 2x4 Bunk Boards on Boat Trailer
- Q&A: What is Height of Power Mountain Tallboy Off Road Bottle Jack When Retracted and Extended
- Article: Boat Trailer Guides: Which are the Best?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: RV Pre-Departure Checklist
- Article: Trailer Lighting Requirements
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Tell the Weight Rating of a Trailer Axle
Jerred H.
2/3/2026
Hey, how did the bunk boards turn out with the marine-grade carpeting and staple spacing you used? Your results could really help others working on new trailer bunks.