Recommended Dutton-Lainson Hand Crank with Loop Drive

Question

Question:

Is there a loop drive attachment available for DL10950

asked by: Kevin H

0

Expert Reply:

There unfortunately not a loop drive attachment for the Dutton-Lainson Hand Winch # DL10950. You'd instead need to use the Dutton-Lainson Hand Winch # DL10956 which has the same 1,500 lb capacity, a worm gear, and a loop drive which will let you use a Shepard hook or power drill.

expert reply by: Bryce D

0

Answer 1

For what you are looking to do a split reel winch like the part #DL10965 would be your best option with two of the 1/4 inch metal ropes part #DL24104. This has more than enough capacity and cable length as well.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 4

Hi Don, great question! You’re really zeroing in on the right style of winch, and I like that you’re thinking about control and safety on that incline because that’s exactly where the right choice makes a difference. Both the WG1500, part #DL10950,…

view full answer...

Answer 5

If you are wanting to use a drill to ease operation of the winch, the Dutton-Lainson #DL11011 would be a much better choice. This winch is specifically designed so that the handle is easily removable for use with a drill. Using the shaft directly…

view full answer...

Answer 6

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

view full answer...

Answer 7

To replace your 1,700 lb Shelby 5407B winch I recommend the Dutton-Lainson Single Speed Winch #DL14627 which is rated for 1,800 lbs. This winch features permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for…

view full answer...

Answer 8

Yes, it will! The grease seal in the Bearing Kit item #BK3-100 has a 2.250" ID and a 3.376 OD.

view full answer...

Answer 9

Worm gear winches actually make the best hoists like what you described. The Dutton Lainson Worm Gear winch part #DL10954 is a ceiling hoist designed for exactly what you are looking for. It has a 1,500 lb lifting capacity and mounts to the ceiling.

view full answer...

Answer 10

Good question. The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part #DL14725 is rated to hold 58 feet of 9/32" cable. That cable has a diameter is 3 times that of what you intend to use on it with the 3/16.…

view full answer...

Recommended Dutton-Lainson Hand Crank with Loop Drive

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching