Can I Use The Curt Crosswing In A 2019 Ram 2500 Short Bed With The Factory Puck System
Updated 05/10/2024 | Published 05/09/2024
Products Featured in This Question
Question:
Hello, I have a 2019 Ram 2500 6.4 short bed with the Puck system. I am looking for a lightweight 5th wheel hitch as weve sold our travel trailer and looking to upgrade to a 5th wheel. Id like to go lightweight for the payload factor but also because there will be times that my wife may need to remove/install the hitch. I have been looking at the CURT Crosswing 16600 but Im unsure if it will be compatible with my system. Is there an adapter that mounts above bed so Im not having to remove my bed that will allow this to work with my truck? Or is there a better system that you might recommend? Any help would be appreciated. Thank you Deston S
asked by: Deston S
Expert Reply:
Hello Deston. The Curt Crosswing # C86JR is definitely going to be the lightest 5th wheel hitch we have. It weighs about 60 lbs so removing it from the bed will be easy. Any other hitch will be well over 100 lbs, with the heaviest hitches like a B&W or Demco weighing in the ballpark of 300 lbs. Since your truck has the puck system, you will need to use the Adapter Rails # C29BR in order to use the Crosswing hitch.
That said, we generally recommend a sliding 5th wheel hitch like the B&W Companion Slider # BWRVK3670 for trucks like yours with the short bed. This is to help gain clearance on sharp turns. A slider is not necessarily required since every truck and trailer combo is different. The downside here is that sliding hitches are quite heavy. The # BWRVK3670 that I mentioned weighs 300 lbs.
If you do choose to stick with the Crosswing hitch, please do be mindful of the clearance between the nose of the camper and the cab of your truck. Especially when you are making sharp turns. Feel free to comment below if you have further questions.
Product Page this Question was Asked From
Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter - 20,000 lbs
- 5th Wheel Gooseneck Adapter
- Adapts Truck
- Gooseneck Hitch to 5th Wheel Trailer
- Provides Extra Clearance
- 20000 lbs
- Installs on 5th Wheel Rails
- Not Shock Absorbing
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Video: Review of MORryde Fifth Wheel King Pin Adaptor - MR37ZR
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Curt CrossWing Lightweight 5th Wheel Trailer Hitch - 20,000 lbs
- Video: Manufacturer Review - Curt Crosswing Lightweight 5th Wheel Trailer Hitch
- Shop: Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset - 12" to 16" Tall
- Shop: Curt Helux Shock-Absorbing 5th Wheel Pin Box - Lippert Rhino - 24K GTW - 6,000 lbs TW
- Shop: Lippert 1621 5th Wheel Pin Box - 15,500 lbs
- Shop: 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate for MORryde Pin Boxes
- Shop: Curt Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000 lbs
- Q&A: 2025 Silverado 2500 Headlights Point Up And Back Squats When Pulling Equipment Trailer
- Q&A: What Curt Helux do I Need to Replace My MORryde RPB72-FD Lippert Rhino Pin Box?
- Q&A: Does the Curt Helux Pin Box Work w/ a Anderson Ultimate 5th Wheel Hitch?
- Q&A: Compatibility of Reese Goose Box Dimensions With Ram Truck
- Q&A: Is there a Curt Helux Replacement Pin Box for the Lippert 1621 Bolt Pattern?
- Q&A: How to Determine if Reese Goose Box Will Have Clearance for Short Bed Truck
- Q&A: Can the Reese Goose Box Adapters Height be Adjusted
- Search Results: fifth wheel hitch
- Shop: Fifth Wheel Hitch