Correct Replacement 4-Way For 2003 Ford Escape With Factory Tow Package

Question

Question:

I installed unit in my 2003 ford escape S Line with tow pigtail on rear left side. I checked fuse and good. Still not working. Any other checks u can recommend

asked by: Douglas H

0

Expert Reply:

Hi Douglas,

The issue is the # C59ZV is the incorrect replacement 4-way for the 2003 Ford Escape. What you will need for the replacement 4-way for your '03 Escape is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55255.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The Curt Trailer Hitch item #C23WR and the Draw-Tite Hitch item #DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz. The main differences between the two hitches are that the Curt is made in the USA and the…

view full answer...

Answer 4

The correct 4-way trailer wiring harness for your 2024 Ford Escape without the factory tow package is the following: - T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C55VV I verified the fit of the #C55VV directly with the…

view full answer...

Answer 5

I took a look at the owner's manual for the 2017 Ford Fusion and the 1.5L GTDI Eco-boost Engine and the maximum trailer weight that it can tow is 1,000 lbs that is including the cargo inside the trailer itself. So if you used the 4x8 cargo…

view full answer...

Answer 6

Hey Doug, The EcoHitch Stealth Trailer Hitch Receiver #EH43SR is the only option that we currently have that's confirmed to fit your 2023 Ford Escape PHEV. If you plan on towing a trailer then you'll want to pick up the T-One Vehicle Wiring…

view full answer...

Answer 7

Hello Alex, thanks for reaching out. We actually custom make our own wiring kit which is designed specifically for this purpose. You can use the Universal Installation Kit #ETBC7. This kit will contain all of the components needed to upgrade your…

view full answer...

Answer 8

The #DR47FR does not fit the hybrid or PHEV models. It fits all other models excluding these two. This means the Draw-Tite hitch will not fit your 2020 Ford Escape Hybrid. However, the etrailer Trailer Hitch Receiver #e89YR is confirmed to fit the…

view full answer...

Answer 9

Yes it does. The Curt Hitch item #C23FR is confirmed to fit all models of the 2023 Ford Escape including the hybrid. This hitch is custom fit and bolts to your Ford with included hardware. I really like this hitch because the crossbar is completely…

view full answer...

Answer 10

If you do not wish to retain the factory backup sensors on your 2008 Mercury Mariner then you can use the 4-Pole Hardwire Kit with Circuit Tester part #18252 instead of the Tow Package Wiring Harness with 4 Pole Trailer Connector part #118251. In…

view full answer...

Correct Replacement 4-Way For 2003 Ford Escape With Factory Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching