Replacement Lid and Lift Arm for Fan-Tastic Roof Vent 8000BT

Question

Question:

Hello - I have a dometic fantastic vent, which the cover and arm broke. The fan is model 8000BT. I believe the replacement part number for the lid is K4020-09. Can you confirm you have this? Also, do you know what the lift arm part number would be?

asked by: Colin F

0

Expert Reply:

Hey Colin, we do have the lift arm with part # FVK8014-05 but the only replacement lids we offer are the domed ones like # FVK1020-19.

expert reply by: Jameson C

0

Answer 1

We do have the lift arm with part #FVK8014-05 but the only replacement lids we offer are the domed ones like #FVK1020-19.

view full answer...

Answer 2

If what you have is a series 400R, 6600, 8000, or 6000 model LR8191 Fan-Tastic Vent Roof Vent Fan, then the correct fan motor replacement is part #FVK8017-00. If you have a different one, please let me know and I will confirm which is the correct…

view full answer...

Answer 3

The correct replacement arm for your Fan-Tastic Vent roof vent is the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05. The replacement arm is the same for the power lift and the manual vent.

view full answer...

Answer 4

We don't have a housing separately in white, there is a way to get it, though it comes with the housing along with a new motor: - Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - White #FVK6010-81 So this…

view full answer...

Answer 5

I reached out to my contact at Fan-Tastic Vent and she said the correct replacement motor for your 12V Vent Fan #FV803350 if it was manufactured after 2014 is the 17-rpm #FVK6010-81. This does operate at a higher speed than what originally came on…

view full answer...

Answer 6

For the Fan-Tastic Vent Fan model 6300 there could be two reasons why it's not opening for you: The manual crank motor could be broken, which the correct replacement is the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents…

view full answer...

Answer 7

Hi Rick, The Replacement Lift Motor #FVK6010-81 still works in Fan-Tastic vents that were made before 2014 like yours, but you'll need to cross the wires. If yours go red to red/black to black you'd just switch that up.

view full answer...

Answer 8

I attached a picture of the style of lift arm that the part #FVK8011-05 is designed to replace. Check it out and compare it to what you have to know if it is the correct replacement product.

view full answer...

Answer 9

Hey Randy, It is definitely possible that with the replacement of the lift motor to part #FVK6010-80 that it wasn't tightened up exactly the same as the previous motor, causing the gears to not engage. You'd have to take a look at the…

view full answer...

Answer 10

The big difference is the corners of the main panel of the #FV807357 are cut out with small section to allow access to mounting hardware and the #FV807359 instead does not have this area cut out. So you'd want to look at your vents to see if you…

view full answer...

Answer 11

Hey John, If you're testing the wiring and there's power getting to the lift motor when the switch is in the off position then you either have a wiring issue or the vent is getting power from somewhere else. With the light going out…

view full answer...

Answer 12

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Replacement Lid and Lift Arm for Fan-Tastic Roof Vent 8000BT

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching