Dimensions Of The Rubber Portion Of The Timbren Rear SES # TDR5500

Question

Question:

What are the dimensions of the rubbers itself?

asked by: Michael G

0

Expert Reply:

Hi Michael,

The rubber portion of the Timbren Rear Suspension Enhancement System # TDR5500 is approximately 4.5" wide by 5" tall.

expert reply by: Kevin C

0

TDR5500 dimensions
(click to enlarge)

Answer 1

I confirmed with Timbren that the #TDR5500 is indeed the correct suspension enhancement spring for your 2015 Ram 5500 Cab and Chassis. The contents of the kit are designed for the stop over the axle as seen in the attached diagram. This kit includes…

view full answer...

Answer 2

The weight capacity for the suspension enhancement kits we offer can be confusing in how it's listed but basically the kits provide their capacity in additional suspension support. So it adds that much support to the vehicle's capacity…

view full answer...

Answer 3

Honestly with these very heavy weights the Timbren #TDR5500 becomes the best option for your 2011 Ram 5500. This particular kit is rated for 12,000lbs of support capacity to the rear suspension. They are also less likely to become damaged under very…

view full answer...

Answer 4

Hey Mike, the total height of the Timbren suspension kit part #TDR5500 is right at 7 inches with the spacer and the mounting bracket. This kit will definitely get rid of the sag as it is capable of providing and additional 12,000 lb of support. What…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 9

There are a couple things to consider between using the Torklift StableLoad #TLA7200 and air bags on your 2022 Ford F-350 Super Duty when transporting your in-bed camper. If you are just looking to decrease sway, the Torklift StableLoad #TLA7200 is a…

view full answer...

Answer 10

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

Answer 11

Hey Bob, congrats on a setting up a new camper! Out of all of those options you'll also need to consider daily driving comfort unless that camper is a permanent addition to your truck bed. Listed below are a brief breakdown of each and a…

view full answer...

Dimensions Of The Rubber Portion Of The Timbren Rear SES # TDR5500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching