Will Curt Q25 5th Wheel Hitch Head Fit M25 Legs

Question

Question:

Is the curt q25 head the same head as the m25, meaning will the q25 first my m25 legs

asked by: Jon

0

Expert Reply:

Hi there Jon, and yes they are indeed the same. The Q25 is the same as the M25 so if you want a replacement head to fit your M25 legs you'd need the following:

- Replacement Head Unit for Curt Q25 5th Wheel Trailer Hitch # C16565

expert reply by: Kyle S

0

Answer 1

I spoke with Curt about the Curt Q25 5th Wheel Hitch and was informed that they do not offer the locking jaw mechanism as a replacement part. I know this is not what you wanted to hear but the fact remains. That said, if you want you can replace just…

view full answer...

Answer 2

Thank you for all of the information regarding your Curt Q25 5th Wheel Trailer Hitch #C16265 being stuck on your 5th wheel trailer. It sounds like you've got 2 things going on here; the first is that the jaws are binding, and the second is that…

view full answer...

Answer 3

Essentially all 5th wheel hitches now have articulating or fully pivoting heads, though we do offer replacement heads with the weight rating you are looking for, and I will list all of them for you below: - Replacement Head Unit for Curt Q25 5th…

view full answer...

Answer 4

Realistically the Curt Q25 #C16039 fifth wheel hitches are no different and will give the same performance. Both of these hitches will fit into the puck system of your 2019 Ford F-350 Super Duty and have a 24,000 lb capacity. The head unit of the Q25…

view full answer...

Answer 5

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This…

view full answer...

Answer 6

While a great hitch, the B&W hitch part #BWRVK3600 does not fit your factory puck system because it is designed for Rams. Instead, the B&W Companion hitch part #BWRVK3300 is what you need to fit your F-350. However, it only has a maximum…

view full answer...

Answer 7

The best option to modernize your older B and W Companion is to switch out the base to part #BWRVB3500 so you will not have to deal with finding the correct u-bolts in the future if you need them because they are no longer available. You would just…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Mark, welcome to the fifth wheel community! I'd be more than happy to help you. So a fifth wheel hitch will sit lower than the top of the truck bed rails so you wouldn't have to remove the head of the hitch to close the cover BUT the…

view full answer...

Will Curt Q25 5th Wheel Hitch Head Fit M25 Legs

Product Page this Question was Asked From

Continue Researching