Trailer Hitch Recommendation for an International 4300

Question

Question:

Hi have international 4300 and it’s 34 inch wide chassis would this work?

asked by: Adam R

0

Expert Reply:

Thanks for reaching out, Adam!

The Buyers Products Hitch Plate with 2" Receiver Tube # 3371809060A is designed to fit a Ford chassis, and all of the other HD hitches like this from Buyers Products.

For your application you need a universal hitch like the Draw-Tite # 41990-07 or # 41990-16 which have different height brackets and are weld-on installations. You'll need to consult with a shop since this is a modification-type installation.

expert reply by: Jon G

0

Answer 1

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 2

You'll need to use the #C59496 that you referenced to install first a 7-way on your dump truck and then to convert to a 7-way you'd just need the #37185 or if you plan to install a brake controller #ETBC7. For a controller the Brake EVN…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15845 will come down about 8 inches from the frame. It does add some support to help with an underrun in a rear end collision so as long as the drop is enough but…

view full answer...

Answer 4

While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit. The hitch plates below all come with…

view full answer...

Answer 5

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 6

Usually they put utility bodies like the one on your 2002 Ford F-350 on the cab and chassis versions of the truck (rather than the standard models that would come with a regular bed). You would need to look at the hitches for the cab and chassis…

view full answer...

Answer 7

The size of the bolts you'll end up using with the Buyers Products Hitch Plate part #3371809061A will depend on the application which is why they are not included or recommended. The other option is that you can have the hitch plate welded in…

view full answer...

Answer 8

We do not supply a 9-pole to a 7-blade connector converter, but you can definitely convert your existing trailer connector to a 7-way blade connecter that will work with your truck. To do this you will need a replacement 7-blade connector like…

view full answer...

Answer 9

To adapt your 9-pin trailer plug to work with the 7-way connector on the truck, you would need the 9-pin vehicle side connector that you referenced, part #R9CB. A length of 7-wire cable #DW04914-1 from the 9-pin would be tapped into the relevant…

view full answer...

Answer 10

I have a solution for you that will allow you to make an adapter, but we do not sell one pre-made. To adapt your 9-pin trailer plug to work with the 7-way connector on the truck, you would need the 9-pin vehicle side connector that you referenced,…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch Recommendation for an International 4300

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching