Availability of a 3500 Pound Axle with Spring Seats on Top of the Axle
Updated 04/21/2014 | Published 04/20/2014
Products Featured in This Question
Question:
Is there anyway I can get one of these axels with the spring mount welded to the top to the axel? Im looking to mount the axel below the springs for more clearance. Thanks
asked by: Mike
0
Expert Reply:
The axles we currently offer, including # 35545E-ST-89 are all set up to have the axle mounting on top of the leaf spring stack. But you can use an over-under conversion kit, # K71-384-00, that will allow you to move the leaf spring stack to the top of the axle like you want.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Trailer Hub Recommendation for Pace American 6 x 12 Trailer with Dexter Axle
- Q&A: Recommended Bolt On 7,000 lbs Capacity Square Jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Q&A: What Axle Can I Use to Replace Dexter Axle DEX 5886681?
- Article: Trailer Lighting Requirements
- Q&A: Need Replacement For Dexter 213273 Axle On 2018 Outback Travel Trailer
- Q&A: Can Brake Drum Be Added To etrailer e37YR 2K Axle With Idler Hubs?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Article: How to Measure a Trailer Axle
- Article: Brake Controller Installation: Starting from Scratch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle