Replacement Bearing Kit for a 3,900 lb Axle
Updated 02/29/2024 | Published 02/22/2024
Question:
What wheel bearing kit do I need for my TT wheels? The axle tag says Capacity: 3,900 lbs?...doesnt specify. The Dexter # is 9798179. Its a 19 foot single axle camper trailer. Your categories seem to jump from 3,500 to 4000 pounds, so Im at 3,900. Thank you.
asked by: Thomas G
Expert Reply:
Hey Thomas, thanks for reaching out!
According to my research your 3,900 lb axle should use the same bearing parts as a 3,500 lb axle so you should need the Hub Bearing Kit for 3,500 lb with #84 Spindle # BK2-100.
This uses an L68149 inner bearing, an L44649 outer bearing, and a grease seal with a 1.719" ID and 2.565" OD so you'll want to verify this on your end as well.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dexter wheel bearings
- Search Results: bearing seal tool
- Search Results: seal puller
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Detailed Breakdown of the Rubber Half Round Seal for RVs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Rubber Half Round Seal for RVs - Stick On - 15' Long x 9/32" Tall
- Q&A: Replacement Grease Seal for Dexter 3,900 lb Axle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Search Results: bearing grease packer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
Tom G.
2/29/2024
Thanks for the detailed reply, Jon. I appreciate it. When the weather gets better I'm going to unwrap the camper (still freezing up here in the Northeast) and get the wheel off so that I can double check the numbers on the races and bearings, just to make sure. Then I'll order the parts as long as the shipping won't take too long. Have a great day!