What Gauge Wire Does The LED Trailer Clearance or Side Marker Light # 328-K-58LB Use?

Question

Question:

hello can you tell me what gauge wire this light uses 328-K-58LB. I want to make sure and get the right size butt connectors. Thank you.

asked by: Renee

0

Expert Reply:

The LED Trailer Clearance or Side Marker Light # 328-K-58LB uses 20 gauge wire. For a Butt Connector I recommend the Deka Heat Shrink Butt Connector # DW05743-5.

expert reply by: Jesse M

0

Answer 1

The 194 LED Light Bulb, part #DI88VR, are suitable for replacing your current C194 bulbs as they are both 194s and have the wedge bases. As for fitting your current fixture, I cannot say for sure. This particular bulb has dimensions of 1.711"…

view full answer...

Answer 2

The Optronics LED Combination Trailer Tail Lights #TLL160RK will replace your tail lights for LED on your Heritage trailer. If you are able to remove the clearance lights from their bases we have the following Amber/Red lights below. Thinline LED…

view full answer...

Answer 3

Glo Brite is indeed out of business, but we may have an amber LED assembly that will work nicely as a replacement to your broken unit. The closest LED assembly we have available to the measurements you provided is with the Command LED Clearance or…

view full answer...

Answer 4

You can certainly use the Optronics kit #TLL160RK for your boat trailer. These tail lights are great for marine trailers as they are sealed and have a waterproof construction. This kit includes 2 red LED tail lights. These lights will need to be…

view full answer...

Answer 5

Depending on the window style and size. I would suggest either the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall #SR43FR or the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall…

view full answer...

Answer 6

Hey Rodney, it sounds like you've done your homework! That MoRryde set up you referenced is definitely going to upgrade your Dutchman's suspension and make towing it more comfortable. You'll want to take two measurements before ordering…

view full answer...

Answer 7

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. This…

view full answer...

Answer 8

Although the DOT numbers you gave me are codes for what testing was done on the lights, I do have a solution for you. For your 2-1/2" round clearance light we have the Peterson Piranha LED Light #162R with the wiring and grommet as part…

view full answer...

Answer 9

Hello David, thanks for reaching out. I hate to be the bearer of bad news, but your only option here will be a new camera system. The WVOM541AP is the old generation of Voyager monitor which is now discontinued. Voyager moved to the WiSight 2.0…

view full answer...

Answer 10

Yes, you can use the Voyager RV Backup Camera Monitor #VOM719WP to upgrade your monitor from the WVOS541 system and it will work with your cameras. These are both WiSight systems and will work together. It only becomes an issue when you have WiSight…

view full answer...

Answer 11

Hey Luis, We can answer both your questions in one as yes, you can change from the CRE3000 to AllTrek 4000, and it's definitely an upgrade worth making, as the AllTrek 4000 is better in a couple ways from the CRE3000. The first is the 4000 is…

view full answer...

Answer 12

The Fulton A60 Surge Brake Actuator is obsolete so you'll need to replace the entre unit for which I recommend using the Demco Hydraulic Brake Actuator part #DM72VR for drum or part #DM62VR for disc. The Demco actuator has a 7,000 lb rating which…

view full answer...