Measurements For The K71-359-00 Dexter Heavy-Duty Suspension Kit
Updated 12/12/2023 | Published 12/11/2023
Products Featured in This Question
Question:
Looking at upgrading the trailer suspension. K71-359-00 e trailer part #, what are the exact measurements. Thank you
asked by: Warren S
Expert Reply:
I have included a diagram below with the measurements of the # K71-359-00 equalizer. The shackle links included with this kit are 2-1/4" long when measured center hole to center hole. The kit is intended for use with 1-3/4" wide double eye leaf springs.
If you are looking to upgrade the suspension on your trailer, the # K71-359-00 kit is a great choice. It is important that the replacement parts are identical in size to the stock suspension components. So your best bet will be to take these measurements and compare them to what is currently on your trailer in order to determine fitment.
(click to enlarge)
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Weight Rating For Dexter Heavy-Duty Suspension Kit # K71-359-00
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Replacement Shackle Strap for E-Z Flex Heavy Duty Rubber Suspension System by Dexter
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Nylon Bushings - 9/16" Inner Diameter, 3/4" Outer Diameter - 1-3/4" Long - Qty 6
- Shop: Replacement Flange Nut for Dexter Trailer Suspension Kits
- Shop: Step Wet Bolt for 1-3/4" Double Eye Springs
- Search Results: k71~359~00
- Search Results: 018~026~05
- Search Results: 007~187~01
- Search Results: 006~092~01
- Search Results: 007~126~01
- Q&A: How to Determine Hub and Drum Assembly & Brakes With 6 on 5-1/2 Bolt Pattern for 10,000 lb Trailer
- Q&A: Availability of 7-3/4 inch Equalizer Kit with 3-1/8 inch Long Shackles
- Q&A: Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
- Search Results: 52k axle
- Search Results: trailer brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Roof Rack Recommendation for Enclosed Trailer for Mounting Solar Panels
- Q&A: Torque Specs for 9/16" Trailer Axle U-Bolts
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: 4" Carbon Fiber Digital Caliper Feature Review
- Video: All About the Grease Seal
- Video: What to Know About the Grease Seal