Replacement Bearaing Kit For A 2013 Ranger Tandem Axle Boat Trailer

Updated 12/07/2023 | Published 12/06/2023

Products Featured in This Question

Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal

(393)

$61.40

Question:

Looking to replace hubs on my 2013 Ranger boat trailer. It is a tandem axle with two 2,500 lb axles. I would like to switch from oil to grease. I prefer to do just the bearings, seals, races and caps if possible. Can you tell me what parts I need? Thank you.

asked by: Marty

Expert Reply:

Thanks for the pictures. The tag does help narrow it down. It appears you have a pair of 2,500 lb axles on your trailer. This means we are likely dealing with an axle with a straight spindle that uses an Inner and outer bearing L44643 (1" inner diameter). We have a bearing kit # TMK34ZR which is what I recommend. These are the U.S made Timken bearings so top quality. I do suggest pulling one of the hubs and confirming the bearing sizes just to be sure, this should not be too much trouble since you will be pulling the hubs anyways.

expert reply by: Jesse M