Hanger Spacings for Trailer Suspension Hanger Kit AP216-H238 with 26-5/8 inch Slipper Spring
Published 12/05/2023
Products Featured in This Question
Question:
I need the Spacing diagram for Hangar kit AP216-H238 for use with E37SR springs ?
asked by: Tim
0
Expert Reply:
When you use the Tandem-Axle Trailer Hanger Kit # AP216-H238 with the 4 Leaf Slipper springs part # SP-230275 the distance between the front hanger and the center hanger will be 30-1/2 inches, the distance from the center hanger to the rear hanger will also be 30-1/2 inches.
This will put the axle centers at 36 inches apart.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Continue Researching
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Hanger, U-Bolt, and Slipper Spring Kit for 8k Trailer Axles
- Q&A: Replacement Bushing For Dexter 5-Leaf 10,000 Pound Axle Slipper Spring DX45QR
- Q&A: Hanger Spacing for Tandem-Axle Trailer Hanger Kit AP216-H238 and 29-1/2 Inch Slipper Springs
- Q&A: Availability of Replacement Parts for Atwood 85736 Brake Actuator
- Q&A: How to Move Axles Under Leaf Springs on a Horse Trailer with Slipper Springs
- Article: How to Measure a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Best Bike Racks for Electric Bikes
- Article: Troubleshooting Brake Controller Installations
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)