Is The 1/2" Metal Loom Clamp # A0500 a Single Component Or Multiple Clamps?

Question

Question:

is that price for each? If not, how many in a package?

asked by: John A

0

Expert Reply:

The price for the 1/2" Metal Loom Clamp # A0500 is for a single clamp. We do have the Clamp Kit # PT43VR which includes (20) 1/4", (8) 5/16", (6) 3/8", (4) 1/2", and (4) 5/8" clamps if you are going to end up needing a variety of different sizes.

expert reply by: Bud M

0

Answer 1

We've found that the amber clearance light from Optronics part #MCL95AB is very bright and easy to install so it would be a great choice for what you are looking for. I attached a picture that shows it on a smaller trailer for you to check out. I…

view full answer...

Answer 2

Hey Uriah, thanks for reaching out! The Tradesman Vaquero Self-Contained Hydraulic A-Frame Trailer Jack #ST86FR will work best if it's hardwired to a battery on your trailer, but you can also hardwire a 7-Way plug and lead like part #H20043 and…

view full answer...

Answer 3

Hi Dick! We do have a couple options for you, but they are listed under flat towing lights, which is why you weren't having luck finding them on our site. So with that said, check out the following two options: Universal Magnetic Tow Lights w/…

view full answer...

Answer 4

We don't offer an 8500 lb rated surge coupler, but we might have options that would work for you. If the GVWR (weight of trailer plug boat) is 8000 lbs or less, I'd recommend the Demco item #DM8669113 if your trailer has disc brakes or item…

view full answer...

Answer 5

Hey Ken! There are 4-flat trailer wiring setups to run 2 sets of trailer lights. Optronics offers the 25 ft. Wishbone 4-Way Trailer Wiring Harness #A25W42B and the 40 ft 4-Way Wishbone Trailer Wiring Harness #A40W42B. These come with bare wires that…

view full answer...

Answer 6

It sounds like you are on the right track to rewire your cattle trailer. You are correct about the wire colors on the 7-way connector that you purchased. The colors that you see on the 7-way connector are typical for RV style trailers rather than…

view full answer...

Answer 7

Yes, Redline makes an oil cap for 9K and 10K axles, #RG04-300, that has a thread diameter of 3-1/2" and a thread pitch of 14. This oil cap will fit axles with the one piece hub and drum. You will need a 2-1/2" socket or wrench for…

view full answer...

Answer 8

Hey Emanuel, so I have a video attached to this page that will show you the process but it's not of the exact kit part #AL98WQ that you asked about. The process is basically identical though as it's basically just about getting the air bag…

view full answer...

Is The 1/2" Metal Loom Clamp # A0500 a Single Component Or Multiple Clamps?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching