Replacement Touch Screen for 2018 Columbus Palomino FK 385

Question

Question:

I have a 2018 Columbus palomino FK 385. I don’t know which touch screen would work for my rv replacement panel.

asked by: Michelle R

1

Helpful Expert Reply:

Thank you for the pictures of your current touch screen. Based on seeing them the correct replacement is the part # LC83VR that you referenced.

expert reply by: Jameson C

1

Touchscreen Panel
(click to enlarge)

Panel RV
(click to enlarge)

Answer 1

If you are receiving power to your screen and have confirmed all of your connections are good then it sounds like you will need to replace it. One last thing you can try is to completely power off your Onecontrol system in hopes of resetting it but…

view full answer...

Answer 2

The Replacement Touch Screen Control Panel for Lippert Ground Control TT or Lippert OneControl #LC83VR does not have a warranty but it is a direct replacement for your current control panel so it's going to control all of the things your old one…

view full answer...

Answer 3

Hey Todd, The replacement jack leg #LC25AF is designed for installation in all jack positions! It has 8 mounting holes on each side of the leg allowing it to be interchangeable with whatever your set up needs. Do you know if yours is a Gen 1 or Gen 2…

view full answer...

Answer 4

Hey Andrew, it sounds like you're looking for the Replacement Hydraulic Jack Assembly for Lippert Level Up 5th Wheel RV Leveling System #LC25AF. This replacement leg replaces one front first generation hydraulic jack for a Lippert Level Up system…

view full answer...

Answer 5

Hey Michael, since you said you need a front jack replacement for a Lippert Level Up system it sounds like you are looking for the part #LC25AF. Does this look like the jack you are wanting to replace?

view full answer...

Answer 6

Hi Douglas; thank you for providing that information down below. What you have now is the 25712510. The correct replacement leg is the Replacement Hydraulic Jack Assembly for Lippert 5th Wheel RV Leveling System - 14,000 lbs - Gen 1 #LC25AF. The…

view full answer...

Answer 7

Thank you for providing those pictures, using the pictures I was able to determine that the Replacement Touch Screen Control Panel #LC83VR is the correct replacement for your Lippert jack system.

view full answer...

Answer 8

The newer systems with the 5 buttons separate from the touchscreen. You will use the touchscreen only for what they call zero point calibration to reset level on your trailer. I've taken a couple screenshots and added them as photos from the…

view full answer...

Answer 9

To reset the Contol Panel #LC421484 for your Lippert Ground Control #LC675817 you will want to disconnect power at the Controller #LC56VR which is typically found in the front storage compartment. If the power connection is to difficult to access you…

view full answer...

Answer 10

Since you have the Lippert OneControl system in your 2019 Grand Design 399TH the correct replacement touch screen is the part #LC83VR. On the bottom of the panel there are a few connections that easily remove from the panel but the amount of them is…

view full answer...

Answer 11

I do have a way which has proven to help control the middle jacks but at this time Lippert does not offer a control panel which allows for operation of just the middle jacks. The Panels #LC74FR and #LC83VR you have along with the Aftermarket Panel…

view full answer...