Solution for Trailer Actuator that Needs Replacement Master Cylinder

Question

Question:

Is this master cylinder compatable for use on Sanger boat trailer which currently has Atwood master?

asked by: Stan S

0

Expert Reply:

I wish we could help but we don't have a solution for a replacement Atwood master cylinder. They got out of the coupler business a while back and none of the current master cylinder replacements would work. Best option will be a new coupler like the part # DX83FR.

expert reply by: Jameson C

0

Answer 1

I recommend replacing your entire brake actuator on your 2000 Jayco 12 tent trailer. The Demco Hydraulic Brake Actuator #DM72VR is a bolt on actuator that will mount to your 3" channel like the Atwood 85830. This is the best route to go as it is…

view full answer...

Answer 2

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 3

If your 2008 Toyota Tundra has the factory 7-way connector in the back, then you should be able to plug in a brake controller adapter under the dash of the Tundra. Does the connector provided by the manufacturer look like the Universal Brake Control…

view full answer...

Answer 4

Since Atwood went out of business none of their actuator (or other product) replacement parts are available unfortunately, so your only real option to having a working actuator is to replace the entire unit. I am attaching a link to our selection of…

view full answer...

Answer 5

Hey Kyle. The Replacement Cable for Dexter Breakaway and Parking Kit for Hydraulic Drum Brakes item #T2385500 is our only parking brake cable. It measures 184" and can not be shortened. What kind of trailer do you have?

view full answer...

Answer 6

Hey Elias, thanks for reaching out! We have the parts #290-991 and #290-992 that you referenced, but the 290-993 for 2.72" OD Hubs was actually discontinued back in 2023 which is why you are having a hard time finding it. You can use a rubber…

view full answer...

Answer 7

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 8

Thank you for all of the photos you sent in! I have some parts I believe will fit, but if you're able to find any exact part numbers on the actuator itself I will be able to provide more of a concrete selection of parts. It looks like your…

view full answer...

Answer 9

Yes, to add an electric lockout to your 12.5K Demco Hydraulic Brake Actuator #DM8101038 you just need the following: - Reverse Lockout Solenoid #DM11993

view full answer...

Answer 10

Hi Tim, I reached out to Demco and they stated that the thread size of the Demco Actuator Replacement Master Cylinder for Drum Brakes #5650 is 3/8" -24 UNF. Demco lists that the brake line kit typically paired up with actuator would come with a…

view full answer...

Solution for Trailer Actuator that Needs Replacement Master Cylinder

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching