Axle-Less Suspension And Electric Brake For Trailer
Updated 03/12/2014 | Published 03/11/2014
Products Featured in This Question
Question:
I am planning to buy this product for our trailer. But i need a hub with a bolt pattern of 5x5.5 also with electric brake. May i know also the prices. Thanks a lot.
asked by: Noel C
Helpful Expert Reply:
I see that you referenced part # ASR5200S01, a 5200 lb axle-less system for your trailer. The Axle-Less systems we offer have bolt patterns of either 5 on 4-1/2 or 4 on 4. We do not currently carry any axle-less systems that have a 5 on 5-1/2 bolt pattern with that weight capacity. I spoke with my contact at Timbren and they told me they do not offer the 5 on 5-1/2 bolt pattern. I have attached a help article that shows how to measure the bolt pattern of a wheel.
If you are able to use a reduced weight capacity system on your trailer, I may have a solution for you. The system I recommend has a 3500 lb capacity and is the Timbren Axle-Less Trailer Suspension System Straight Spindle, part # ASR3500S05. You could then use the Dexter Trailer Hub And Drum, part # 84557UC3. This hub and drum includes the bearings, races, grease cap, seal, lug nuts and wheel bolts, and has a 5 on 5-1/2 wheel bolt pattern.
The brakes I recommend are the Nev-R-Adjust Electric Brake Assembly, part # 23-468 for the left hand and part # 23-469 for the right hand. The prices are listed on the product pages on our website.
I have also attached links to some videos about these products for you.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How To Convert Mobile Home Hub To Common Trailer Hub
- Q&A: How to Determine Hub and Spindle Size
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Q&A: Upgrading from a 3,500 Lb to a 5,200 Lb Axle On a Trailer with 80-1/2 Inch Hub Face Length
- Article: Most Popular Wheel Bearings
- Q&A: Does etrailer Anti-Rattle Hitch Collar Work With Weight Distribution
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Q&A: Replacement for 3,500 lb Axle With 92-1/2 Inch Hub Face Measurement
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: How to Measure for Trailer Hitch Drop