bing tracking image
Customer Service My Orders
Q & A Icon

Parts Needed to Add a 7-Way Connector to a 2007 Range Rover  

Updated 07/16/2023 | Published 07/15/2023



Question:

2007 Range Rover I need a 7 pin connector so I can have trailer brakes as well as lights

0

Expert Reply:

I checked with our vendors and there are no custom fit wiring harnesses available for the 2007 Range Rover. This means to add a 7-way connector you will need to install both a 4-way and 7-way.

The first harness you will need is the Upgraded Modulite Vehicle Wiring Harness Kit item # 119147KIT. This is a universal harness that you will need to splice into your Range Rover's wiring. It will provide you with a 4-way connector.

The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Range Rover with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. 

You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on the vehicle's battery, the white wire to ground, and the yellow wire to vehicle's reverse circuit if applicable. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.

To operate your trailer's brakes you will also need a brake controller, I recommend the Redarc Tow-Pro Liberty Brake Controller item # RED24FR and the item # RED69FR wiring harness.

expert reply by:
0
Jerred H
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>