Tips For Removing Old Inner Member For Dexter A-60 To Replace with New One

Updated 06/21/2023 | Published 06/20/2023

Products Featured in This Question

Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K

(246)

$353.95

Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs

(60)

$401.22

Question:

Hi, I am trying to remove the inner portion of my a-60 surge brake. I was able to remove the large rear roller pin but the front roller pin does not want to slide even with quite a bit of force. It rotates freely but it wont slide out of the holes. Any suggestions on how to get this out so I can purchase a new ?

asked by: Brian

Expert Reply:

I took a look at the A-60 Surge Brake Actuator like the Dexter # DX56FR, and to remove the front pin you'll need to remove the locking ring from the front rolling pin on the passenger side, and push it out from the passenger side to the driver side.

Once you have it out, since you already have the rear roller pin out the inner member will come right out.

If you don't already have a replacement inner member just let me know what hitch ball size and weight capacity your coupler has. One such as the # DX99FR works for 7,500lb rated couplers with a 2" hitch ball.

expert reply by: Samuel C