Search: bleeder screw   >  

Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a…

Hey Randy, The arms on your slide-out awning have A&E labels so you'll actually have to reach out to Dometic because Solera and other brands use different size components, making them incompatible with each other. If you give Dometic a call…

The bleed screw of the Kodiak #KBPBB is the size 1/4"-28 and the thread size for the sleeve adapter it screws into is 1/8 inch.

It should, Gene. The DeeMaxx Hydraulic Brake Line Kit #DE37SR is designed for triple axle trailers, and will work great with with disc and drum brakes. You're just going to need to make sure the fitting sizes are the right size. This kit uses…

The Dexter 10" Hub-and-Rotor Assembly part #K08-435-05 works with the Grease Cap part #F001518.

Hey Shaun, thanks for reaching out! The Dico Replacement Master Cylinder for Model 60 Actuator 23361 was replaced by the Replacement Master Cylinder Assembly #T4395100 so you'll want this instead of the Demco #DM24ZR you were looking at.

The brake line kit that would be best for you will depend the number of brake assemblies, the length of the trailer and whether the brakes are drum or disc. If you have a single axle trailer using drum or disc brakes, and the distance between the…

The best way to determine which replacement hubs you need for your trailer would be to remove one of the hubs and retrieve the bearings. Find the numbers stamped into the bearings and with those we will be able to get you the correct hubs. If you are…

For the Titan Model 60 drum brake actuator, the replacement master cylinder assembly that you have referenced, #T4395100, is the correct kit for you. It comes with the master cylinder itself, gasket, 1/64 orifice connector, mounting hardware, cover,…

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

Hey Eric, there there would be no issue with using the Dexter Surge Actuator part #DX56FR with a trailer that has a single brake axle.

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…