How to Determine Which Trim Insert Is Needed for My 2004 Itasca Suncruiser Motorhome

Question

Question:

I have a 2004 Itasca Suncruiser 33inch motorhome. The molding that covers the screws that hold the rear cap on needs to be replaced. Any ideas as to which molding I need to use? Please advise. Thanks.

asked by: Harold R

0

Expert Reply:

All you're going to have to do to determine which trim insert you need s measure the available width inside your trim.

We currently carry 3/4" # CAM25262 and a 1" trim insert # CAM25202 for you to choose from.

expert reply by: Bryce D

0

Answer 1

If by shoulder to shoulder you mean the inside of the track is 3/4" then we have the following color options: Black #37211235 Colonial White #CAM25242 Beige #CAM25153 White #CAM25262 If you mean that the opening in the track is 3/4" wide…

view full answer...

Answer 2

Thank you for the pictures, you're just needing the trim inserts. You'll just need to measure the space available for the trim insert to find the correct size. We carry 3/4" #CAM25262 and 1" #CAM25202 widths.

view full answer...

Answer 3

Hey Greg, The AquaFresh Exterior Water Filter System #AF77FR is designed to work with standard (3/4") garden hose fittings. If you're in need of a hose that's made of non-toxic material then you can also pick up AquaFresh's 25'…

view full answer...

Answer 4

The Camco RV Vinyl Trim Insert #CAM25202 is 1-inch wide and is intended to slide into an existing metal track on an RV, such as the one shown in the linked photo. That metal channel is what holds the trim strip in place. We have this type of material…

view full answer...

Answer 5

Don't worry! Some of the RV products we sell can reasonably be called by multiple names and it can be tough to search for something without knowing the specific term we happen to use. For actual weather-stripping material we have two items shown…

view full answer...

Answer 6

Hey Dan, There unfortunately isn't a guide to tell us what size skylight dome your trailer has installed on it so you'll need to measure your current one to find the correct replacement. We offer the following sizes: 14"W x 14"L…

view full answer...

Answer 7

Frank, by far it's going to be the Camco RV Vinyl Trim Insert #CAM25202. Both trims are made of Vinyl, but the Camco #CAM25202 also has UV inhibitors as well which is going to provide some long-lasting protection against the sun.

view full answer...

Answer 8

Thank you for the photo of your travel trailer's window trim channel for which you are looking for new cosmetic vinyl trim. I went to our warehouse to look at Camco trim insert #CAM25262 which at 3/4-inch width is the closest to your…

view full answer...

Answer 9

The Camco RV Vinyl Trim Insert #CAM25202 that you referenced has an overall width of 1 inch. That's the size of rail it would fit into. I attached a picture that shows it's width for you to see as well.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

How to Determine Which Trim Insert Is Needed for My 2004 Itasca Suncruiser Motorhome

Product Page this Question was Asked From

Continue Researching