Can Dexter Actuator # T47457007K Replace Titan Model 60

Question

Question:

Dexter/Titan Model # T47457007K? is this a replacement for the Titan Model 60?

asked by: Krak A

1

Helpful Expert Reply:

Yes, the Dexter Brake Actuator part # T47457007K that you referenced is a replacement for your Titan Model 60 actuator.

expert reply by: Jameson C

1

Titan Model 60
(click to enlarge)

Answer 1

Hello Matt, thanks for reaching out. Atwood is no longer in business, so you are correct that no parts are available for the 61101 actuators. The Demco Hydraulic Brake Actuator #DM72VR can be used to replace it, but it is not necessarily a direct…

view full answer...

Answer 2

I don't have a wiring diagram, but I'd be happy to explain it for you. In order for the reverse solenoid on a Hydraulic Brake Coupler like #DM62VR to function, one of the two wires leading from it needs to be connected to the wire from the…

view full answer...

Answer 3

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…

view full answer...

Answer 4

It is not recommend to jack up a trailer by the axle. This may cause damage to the axle itself. It also puts too much stress on the leaf springs. Instead, you will want to place the jack under part of the trailer frame preferably next to the leaf…

view full answer...

Answer 5

When you bleed the brakes on your trailer after installing the Kodiak Calipers #KDBC225DAC, you will want to start with the brake that is furthest away from the actuator. Of the two bleeder valves, you will want to use the bleeder valve that is on…

view full answer...

Answer 6

The Dexter Zinc-Plated Brake Actuator #T43397007K is a replacement for the DICO/Titan Model 60 actuator. As Dexter bought Titan this is now their version of the Model 60 actuator. This will work with the Hydraulic Trailer Brake Kit #AKUBRK-35-D but…

view full answer...

Answer 7

Since your current Atwood surge drum actuator is welded to your trailer frame what you'll need to do is take the trailer to a welder who can cut the welds and remove what you have now and in place install a weld on coupler designed for disc…

view full answer...

Answer 8

I have attached an install video to this page for you to check out that you can use as a guide for installing the Titan Model 60 actuator part #T43397007K that you referenced. The video shows a very similar Demco coupler part #DM72VR but the couplers…

view full answer...

Answer 9

Hey Ushaan, welcome back! The Dexter Zinc-Plated Brake Actuator #T43397007K is the direct replacement for the Titan model 60 ZX7000. This has bolt holes 3" apart on center. The Demco Hydraulic Brake Actuator #DM72VR can certainly be used as a…

view full answer...

Answer 10

It sounds like you have coupler like the Dexter Zinc-Plated Brake Actuator #T43397007K and hydraulic surge brakes on your 1998 Eagle boat trailer. This particular coupler is specific to drum brakes but there are similar units for disc brakes Item…

view full answer...

Answer 11

The DeeMaxx Disc Brake Kit #DE82FR with the Maxx coating has a salt spray rating of over 1,000 hours while the DeeMaxx Disc Brake Kit #DE54VR with the Stainless construction isn't rated for salt spray, but when I spoke with the owner he said the…

view full answer...

Answer 12

I really wish there was a cheap and easy way to lock out a Titan model 60 actuator but the only way would be with an electric lock out like the part #T4748800. This threads onto the back of your current actuator and once ran to the reverse light…

view full answer...

Can Dexter Actuator # T47457007K Replace Titan Model 60

Product Page this Question was Asked From

Continue Researching