What Size Wind Fairing For 50 Inch Inno Square Crossbars

Question

Question:

Looking to purchase Inno 50” bars INB127 What size fairing should I run 40” or 48”?

asked by: Joshua H

0

Expert Reply:

For the 50 inch Inno Square Crossbars # INB127, what you'll want to use is the 40 inch wind fairing, which is the following part number:

- Inno Fairing for Roof Racks # INA261

Really smart choice going with a wind fairing for square crossbars, as it will really help cut down the wind noise, particularly at higher speeds.

expert reply by: Kyle S

0

Answer 1

We can help you find the parts you're looking for, and really, if you're using a set of crossbars with T-slot mounting paired with accessories that mount in those channels the clearance from the roof won't be a factor. With that said, the…

view full answer...

Answer 2

The SportRack #SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with…

view full answer...

Answer 3

The etrailer.com J-Style Kayak Carrier #e98878 is designed to fit on a variety of crossbar styles, including most OEM crossbars. As long as your bars are smaller than 4" wide and between 7/8"-2" thick, the etrailer.com J-Style Kayak…

view full answer...

Answer 4

Since you said 71 inch crossbars wouldn't extend past the side mirrors on your 2022 Lexus GX460 it would work and be safe. You'd want to watch your head getting and and out of the vehicle and also around tight corners in like drive through…

view full answer...

Answer 5

The Inno Feet for Square Crossbars #INXP will work with your older Thule square load bars. To fit on your 2008 Mazda 5, they would also need the Custom Fit Kit #INTR120. Those two parts will work together to make a complete set ready for your square…

view full answer...

Answer 6

I checked out the OEM roof rack for your 2017 Subaru Impreza that you inquired about and it doesn't quite look like any of the roof racks that we have to offer. Typically OEM roof racks will get the job done, but going with a brand like Thule or…

view full answer...

Answer 7

Yes that is correct the Inno Square Crossbars #INB127 with the Inno Feet for Square Crossbars #INXP and the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet #IN78FR will all work just fine with your 2016 Acura MDX and…

view full answer...

Answer 8

Rhino Rack doesn't provide the static weight capacity of their racks, but the system on your 2016 Kia Soul has a dynamic capacity of 165 lbs which will support the tent #TH8001KSK05 alone. Adding a third bar to your set up will help if you're…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

What Size Wind Fairing For 50 Inch Inno Square Crossbars

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching