Why Does The JT's Strong Arm Jack Stabilizer Kit Only Come With Six Stabilizers

Question

Question:

Why does Jts strong arms only come 6 to a pack , when with 4 Jacks there should be 8?

asked by: Ralf G

1

Helpful Expert Reply:

The JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 only comes with 6 sets because the a majority of the weight of the trailer is supported by the axles/wheels which are towards the end of the end of the trailer, so only one stabilizer is needed at the rear stabilizers. The front stabilizers have more body to support and prevent movement for so the extra set is used to support the trailer from front-to-back and side-to-side movement.

I've attached a short video below where Conner will walk you through the installation process if you choose to complete it on your own.

expert reply by: Kevin C

1

Answer 1

The MORryde cushioned suspension equalizers like the CRE3000 part #MR27ZR that you referenced do not affect the height of the trailer at all. If you wanted to lift the trailer you could use the Correct Track lift kit part #RR23QX as well.

view full answer...

Answer 2

Well you've reached out to the right place, Kaivon - I'd be happy to help you navigate upgrading your trailer suspension! All three of those suspension kits you asked about are great, but my recommendation is using the MORryde Rubber…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In regards to your stabilizer jacks being installed at 45 degree angles, I believe you are referring to telescoping jacks. If they look like what is shown in the accompanying photo then yes, you will be able to use the JT's Strong Arm Jack…

view full answer...

Answer 5

It sure can Larry. The Mach-C Everest Variable Speed RV Air Conditioner System item #CM35MR includes an air distribution box that can be used for a top down set up. There's a baffle built into the air distribution box that can be removed to push…

view full answer...

Answer 6

Hey Patrick, thanks for the measurement. The Travel Door Latch for GE Appliances RV Refrigerator item #GE98FR has mounting holes 1-3/16" on center. It's designed for the 9.8 Cu. Ft. GE Appliances RV Refrigerator with Top Freezer item #GE58FR…

view full answer...

Answer 7

Hey Chris, so I looked up the Lippert Rock Solid stabilizer jack and it looks like a JTs Strongarm like the part #LC191025 which actually can be installed on scissor jacks like it sounds like you have. Let me know if you are thinking of something…

view full answer...

Answer 8

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 9

Hey Jonatan, I looked up the Dexter part number K71-653-06 and it is exact same kit as the part #K71-653-00 so this would be what you would want. Are you trying to reduce chucking by chance?

view full answer...

Answer 10

On the front landing gear legs of an RV you install two of the JT's Strongarms of part #LC191025 like what you see in the attached picture and install video. This is why the kits come with 6 arms total. Four for the front and 2 for the scissor…

view full answer...

Why Does The JT's Strong Arm Jack Stabilizer Kit Only Come With Six Stabilizers

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching