Recommended 60 x 20 Sliding Tray  

In order to clear the 2 inch lip in your compartment, you will need spacers for the 60" x 20" MORryde Sliding Tray for RV Cargo Compartment #MR44FR. MORryde does make a kit for exactly that though, so all you would need to do is add the…

Per the manufacturer, MORryde, "Actual tray width is 1/4? less than sizes listed. This allows the tray to fit inside the door opening. E.g. a 20? wide tray will fit inside a 20? wide door opening." The actual overall width of the MORryde…

The MORryde RV Cargo Sliding Tray #MR94FR has a 1.57" height from the floor to the tray. If you need some extra clearance you can use the Height Adjustment Kit for MORryde RV Cargo Sliding Trays #MR34VR.

From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray #MR87FR measures 3-1/2" (see attached). If you jump to the 3 minute mark of the linked review video you can see where we take…

The overall width of the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide - 80 Percent Extension - 500 lbs part #MR74FR is 19.74" which is measured from the outside of each rail on either side. The tray width is only…

The overall outside to outside dimensions of the MORryde Sliding Tray for RV Cargo Compartment #MR84FR is 90 inch by 20 inch.

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not…