Ball Mount with 2-5/16 inch Ball that is Longer than 8 inches and Higher than 10k Capacity

Updated 01/23/2023 | Published 01/22/2023

Question:

I’m looking for a 2-5/16 “Ball mount with a long shank from the center of the ball to the Hitch pin that is 8 in or greater. The ball mount needs to be 2-5/16 in. ball and rated for 10,000 lbs capacity. The distance from the hitch pin to the end of the shank Max is 2 inches to fit into a receiver, it does not work with anything with a longer length. The one in the picture works but the length of the shank needs to be longer.

asked by: Miley

Expert Reply:

We have the Gen-Y Ball Mount part # 325-GH-054 which has 9-1/4 inches from the ball center to the hitch pin hole and has a 16,000 lb weight capacity. It also is a multi ball setup that has a 2 inch and 2-5/16 inch hitch ball.

expert reply by: Jameson C