Gen-Y 2-Ball Mount for 2" Hitch Receivers - 2-5/16" and 2" Balls

See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount

• Recommended Straight Tongue Ball Mount for a 37' Camper
  Hey David, so if you don't actually need any drop or rise then I'd suggest using a straight ball mount like the Gen-Y 2-Ball Mount for 2" Hitch Receivers # 325-GH-054. This ball mount includes two hitch balls, a 2" and a 2 5/16". When using the 2 5/16" ball you'll have a 16k capacity which I think is plenty for your trailer. I don't think you quite need a 20k ball mount, especially if you're looking at a ball mount that is 14k or higher.
  view full answer...
• What Size is The Bolt Hole For The 1-7/8" Hitch Ball On The Gen-Y 3-Ball Mount # 325-GH-054?
  The 1-7/8" Bolt-On Hitch Ball # 325-GH-090 for the Gen-Y 3-Ball Mount # 325-GH-054 uses a 3/4" x 4" bolt to secure the ball. The hole is just slightly larger than this.
  view full answer...
• Does Gen-Y 3-Ball Mount for 2-Inch Hitch Receivers 325-GH-054 Have Solid Steel Shank
  Yes, the Gen-Y 3-Ball Mount for 2-Inch Hitch Receivers # 325-GH-054 has a solid steel shank. The solid shank accounts for much of the 19-lb shipping weight of this USA-made 3-ball mount. Overall length is 12-inches. You can refer to the linked side-view photo to see the solid steel shank. Please note that the towing capacities differ for each size of hitch ball.
  view full answer...
  
• Ball Mount with 2-5/16 inch Ball that is Longer than 8 inches and Higher than 10k Capacity
  We have the Gen-Y Ball Mount part # 325-GH-054 which has 9-1/4 inches from the ball center to the hitch pin hole and has a 16,000 lb weight capacity. It also is a multi ball setup that has a 2 inch and 2-5/16 inch hitch ball.
  view full answer...
  
• Does Gen-Y Ball Mount 325-GH-054 Have 2-5/16 inch Hitch Ball
  The Gen-Y ball mount part # 325-GH-054 actually already has a 2-5/16 inch hitch ball that is rated for 16,000 lb so there would be no need to add another ball in same size. The other ball is a 2 inch ball.
  view full answer...
• Is the Buyers Products Tri-Ball Hitch Made In the USA
  The Buyers Products Tri-Ball Hitch part # 3371802205 is made overseas but we do have a made in USA alternative, the Gen-Y 3-Ball Mount for 2" Hitch Receivers part # 325-GH-054.
  view full answer...
• What Is The Distance From The Center Of The Hitch Pin Hole To Ball Hole On Gen-Y 325-GH-054?
  From the center of the hitch pin hole to the center of the 2-5/16" and 2" hitch balls on the Gen-Y 3-Ball Mount for 2" Hitch Receivers - 2-5/16", 2", 1-7/8" Balls # 325-GH-054 measures 9-1/4", and from the center of the hitch pin hole to the center of the 1-7/8" hitch ball is 8-3/8" as shown in the included diagram. I included a video of the # 325-GH-054 for you to take a look at.
  view full answer...
  
• Solution for Gaining Clearance Between Bumper and Ball Mount on 2022 Ram 2500
  In order to gain additional space between the bumper and the ball I recommend using a ball mount with a long shank. You would not be able to use an extender since the extender will reduce the capacity of the hitch by 50%. We do have one ball mount that may work, which is the Gen-Y 3-Ball Mount for 2" Hitch Receivers - 2-5/16", 2", 1-7/8" Balls # 325-GH-054. This ball mount fits a 2" receiver and has a gross towing weight of 12,000 lbs for the 2" ball and 16,000 lbs for the 2-5/16" ball....
  view full answer...
  
• Will Trailer Hitch Receiver From 2018 Ford F-350 Fit On 2012 Ford F-350
  I have another option for you, but the trailer hitch receiver off a 2018 Ford F-350 will not fit on your 2012 Ford F-350 due to changes between the two trucks. For a trailer hitch receiver confirmed to fit your 2012 Ford F-350 I recommend the Curt Trailer Hitch Receiver # C15410 which has a maximum trailer weight rating of 17000lbs and a maximum tongue weight rating of 2550lbs making it a great heavy duty option for your truck. You will want to look in your vehicles owner's manual to confirm...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?