Replacement Hardware for EcoHitch on a 2010-2015 Toyota Prius and Prius Hybrid Plug-In

Question

Question:

Hello, I’m looking for a bolt kit for an e trailer hitch item#306-X7178. How can I purchase? Thanks.

asked by: Nathan

0

Expert Reply:

To replace the hardware on your EcoHitch Hidden Trailer Hitch Receiver # 306-X7178 you will need the part # EH29SR This comes with the exact hardware needed to install the hitch properly on your 2010-2015 Toyota Prius or 2012-2015 Prius Plug-In Hybrid.

expert reply by: Jon G

0

Answer 1

Hey Michael welcome back! First thing I noticed is Firestone really needs to update their installation instructions for the Firestone Coil-Rite Air Helper Springs item #F4136. Luckily we've had quite a few customers install this on a Toyota Prius…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Answer 8

I believe you are talking about the 1/4" nuts and bolts that are a part of the hardware that comes with the EcoHitch Hidden Trailer Hitch #306-X7178. I took a look at the installation instructions and the purpose of that hardware is to use only…

view full answer...

Answer 9

Hey James, this is a great question but oddly enough there aren't any hidden hitches made for your 2026 Toyota Sienna at this time. The only hitches we offer are ones that do hang below the rear bumper like the Curt #C22UR. I couldn't find…

view full answer...

Answer 10

I spoke with my contact at BedRug and the VanRug Custom Floor Mat, #VRG96, was designed for the 1996 - 2014 Chevrolet Express Cargo Van with standard wheelbase. In order for this mat to work in your 2014 Chevrolet Express 3500 passenger van, you…

view full answer...

Answer 11

Hey Rick, I have a solution for you but the #CSS-1168R are not listed as a fit for the all wheel drive versions of the 2023 Toyota Sienna. That said we have heard from customers with the AWD versions and it did work well so it should work just fine.…

view full answer...

Answer 12

Hey CD, you’re on the right track being concerned with heat and highway speeds in mind. With your current 5.70-8 tires, the main limitation won't be weight with your camper is only around 1,100 lbs, it’s heat and speed rating. Smaller trailer…

view full answer...

Replacement Hardware for EcoHitch on a 2010-2015 Toyota Prius and Prius Hybrid Plug-In

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching